January Secret Pal Swap - Registration Closed
#520
I think this will work:
you will need the following;
2 - 1" squares (1 white/1 light)
2 - strips 1" x 1 1/2" (1 light/1 dark)
2 - strips 1 " x 2" (1 light/1 dark)
2 - strips 1" x 2 1/2" (1 light/1 dark)
1 - strip 1" x 3" (1 dark)
1 - strip 1" x3" (dark) folded in 1/2 lengthwise and sewn right sides together on 3" side and turned for the loop
1 - 3" square fabric for the back
1 - 3" square batting
sew together as follows / I used scant 1/4" seams;
center blocks 1 & 2 are 1" square white & light sewn together
then add block 3 to bottom { strip 1" x 1 1/2"} light
then add blodk 4 to left side {strip 1" x 1 1/2"} dark
then add block 5 to top {strip 1" x 2" } dark
then add block 6 to right side {strip 1' x 2"} light
then add block 7 to bottom {strip 1" x 2 1/2"} light
then add block 8 to left side {strip 1" x 2 1/2"} dark
then final block 9 to top {strip 1" x 3"} dark
after you have finished the log cabin block, sandwich the folded loop in the corner on right side of fabric
add backing fabric right sides together and batting if desired stitch around edges leaving a 1 1/2" opening to turn
clip corners / turn / square corners and stitch shut the opening.
add chain to loop and you should have something similar to the picture.
I also did a 9 patch using 1" x 3" strips which was a real challenge, ended up with 1 1/2" square almost impossible to work with.....don't recommend it......maybe a 1 1/2" strip would work better.
you will need the following;
2 - 1" squares (1 white/1 light)
2 - strips 1" x 1 1/2" (1 light/1 dark)
2 - strips 1 " x 2" (1 light/1 dark)
2 - strips 1" x 2 1/2" (1 light/1 dark)
1 - strip 1" x 3" (1 dark)
1 - strip 1" x3" (dark) folded in 1/2 lengthwise and sewn right sides together on 3" side and turned for the loop
1 - 3" square fabric for the back
1 - 3" square batting
sew together as follows / I used scant 1/4" seams;
center blocks 1 & 2 are 1" square white & light sewn together
then add block 3 to bottom { strip 1" x 1 1/2"} light
then add blodk 4 to left side {strip 1" x 1 1/2"} dark
then add block 5 to top {strip 1" x 2" } dark
then add block 6 to right side {strip 1' x 2"} light
then add block 7 to bottom {strip 1" x 2 1/2"} light
then add block 8 to left side {strip 1" x 2 1/2"} dark
then final block 9 to top {strip 1" x 3"} dark
after you have finished the log cabin block, sandwich the folded loop in the corner on right side of fabric
add backing fabric right sides together and batting if desired stitch around edges leaving a 1 1/2" opening to turn
clip corners / turn / square corners and stitch shut the opening.
add chain to loop and you should have something similar to the picture.
I also did a 9 patch using 1" x 3" strips which was a real challenge, ended up with 1 1/2" square almost impossible to work with.....don't recommend it......maybe a 1 1/2" strip would work better.
Originally Posted by Roseysue
Thanks pattis47 for doing that
Thread
Thread Starter
Forum
Replies
Last Post
hav4boys
Member Swaps and Round/Row Robins
96
10-30-2018 05:42 PM
Lori Peercy
Member Swaps and Round/Row Robins
313
03-02-2014 08:03 PM
Lori Peercy
Member Swaps and Round/Row Robins
285
02-05-2014 07:22 PM
Lori Peercy
Member Swaps and Round/Row Robins
880
03-18-2013 10:24 PM
luvTooQuilt
Member Swaps and Round/Row Robins
117
07-07-2011 07:52 PM