Lighting for new sewing room
#11
Member
Thread Starter
Join Date: May 2013
Location: Cincinnati
Posts: 14
While halogen gets very hot, I do love the light from them. Find it very clean. I have halogen under cabinet lights in my kitchen and a halogen desk lamp that I use for hand sewing. I'd love to do halogen track lighting in my sewing room but not willing to deal with plaster/lathe ceiling at this point. Maybe one day. I'd sew naked to use halogen lights!
#12
I use 4' daylight florescent lights above my sewing table and above the cutting table. Thoughout the rest of the house I use the curley Q daylight bulbs. Neither of these get hot. DH has a problem with depression and this helps in the winter when there's so little sun plus it allows for everything to be the right color. I've been using them for about 5 years and so far have only had to change two bulbs. A 25 watt bulb gives off as much light as a regular 100 watt bulb so it's a lot less expensive on our electric bill.
Last edited by jeaninmaine; 07-13-2013 at 05:36 AM.
#14
Super Member
Join Date: Oct 2010
Location: Prescott Valley, AZ
Posts: 1,329
I use 4' daylight florescent lights above my sewing table and above the cutting table. Thoughout the rest of the house I use the curley Q daylight bulbs. Neither of these get hot. DH has a problem with depression and this helps in the winter when there's so little sun plus it allows for everything to be the right color. I've been using them for about 5 years and so far have only had to change two bulbs. A 25 watt bulb gives off as much light as a regular 100 watt bulb so it's a lot less expensive on our electric bill.
#15
Power Poster
Join Date: Mar 2013
Location: Corpus Christi, Tx.
Posts: 16,105
Those new lights that look like spirals. Suppose to be more efficient. I have a lot of natural light that comes into my sewing room. BUT I have sunny yellow walls. I really don't have trouble with the colors when I have the blinds open. We have binocular neighbors. LOL! I wave at them often and they get out of their window quickly then I put up my design panel wall and they give up! LOL!
#16
I have a light box in the center of the room ceiling with florescent bulbs...2 about 4 ft long... They have lasted for years with changing only once and don't give off heat. I also have a large double window across the room and a table Ott light if I need concentrated light for a particular project. I believe good lighting is so essential. I have never regretted using florescent bulbs. My room is painted a creamy yellow so I'm sure that helps as well.
#17
Junior Member
Join Date: Jun 2011
Location: Clayton, Indiana
Posts: 240
My husband just changed all the lights in my sewing room. You have to look for the right fixtures and bulbs. The are flourscent (sp) but they are the new T12. They are brighter and they give off no heat. I have had them for about 6 months and I just love them so much more light and no heat. We got them at Lowes.
#18
Member
Thread Starter
Join Date: May 2013
Location: Cincinnati
Posts: 14
My husband just changed all the lights in my sewing room. You have to look for the right fixtures and bulbs. The are flourscent (sp) but they are the new T12. They are brighter and they give off no heat. I have had them for about 6 months and I just love them so much more light and no heat. We got them at Lowes.
Last edited by NoraM; 07-13-2013 at 08:16 AM. Reason: Added link to resource
#19
I asked about what would be the best lighting for sewing at the lighting store we did our house through - they said florescent is the best task lighting. Since we were building, I could accommodate anything.
#20
Super Member
Join Date: Mar 2010
Location: Anchorage, AK
Posts: 1,398
I too installed halogen in my sewing room and took them out because of the heat. One way to use them and avoid the head issue is to use them in up-lights so the light bounces off the ceiling instead of shining directly on the workstation. It still gets warm in the area, but no direct heat on the body! Reflected light also helps eliminate shadows that can sometimes be a pain in the workspace.
I installed an inexpensive dining room light fixture in my sewing room - 6 bulbs providing down light = and as soon as I use up all my regular bulbs I'm going straight daylight bulbs.
I installed an inexpensive dining room light fixture in my sewing room - 6 bulbs providing down light = and as soon as I use up all my regular bulbs I'm going straight daylight bulbs.
Thread
Thread Starter
Forum
Replies
Last Post