Elna Carina Model 65 Air Electronic
01-20-2014, 01:51 PM
#31
Super Member
Join Date: Apr 2011
Location: NE Ohio
Posts: 1,012
I have an elna SU. I got it in the early 70's. The only machine I use. I tried using my niece's once, it was plastic and I just couldn't do it. Are machines now days not made of metal? I LOVE my elna. I hope I have it forever! I found several websites devoted to them just by googling it. you can also view the manual online so you don't have to buy it.
06-25-2014, 07:09 AM
#32
Super Member
Join Date: Oct 2010
Location: Royse City Texas
Posts: 2,870
I had this machine! It was a dream machine for the period! I loved it and used it for about 20 years off and on. Just sold it on ebay recently for about $125 I think - no accessories with it...couldn't find the books, cams etc. - Now I found them! Anyway...I paid $788. in 1979 for this machine. WOW I got a deal I think. I never took it in for a cleaning! Bad - yes?
06-28-2014, 08:07 AM
#33
Super Member
Join Date: Sep 2011
Location: Carroll, Iowa
Posts: 3,426
Don't have that model but had their SU62 back in the 70's. Loved that machine and the fact it was basically all metal. Sold it when I got my Viking Designer1 and have been kicking myself ever since. Tried to buy it back for twice the money and the lady wouldn't part with it. Guess she knew what a gem she had.
Elna made a great machine back then. I have one of their sergers too and have never had trouble with it that wasn't my own doing.....basically threading it. Now I keep it for 3-thread only and picked up another serger for cover stitch. This way I don't have to rethread either one.
Elna made a great machine back then. I have one of their sergers too and have never had trouble with it that wasn't my own doing.....basically threading it. Now I keep it for 3-thread only and picked up another serger for cover stitch. This way I don't have to rethread either one.
10-23-2021, 04:12 AM
#37
Member
Join Date: Oct 2021
Posts: 1
Can you help me please.
I bought this one today. It's mostly metal and made in the early 80's. It's one of the last models Elna made in Switzerland. I spent a few hours working on it. There are only a few
problems with it. 1) it has one broken spool holder and it can't be repaired
easily. The actual material on the on the inside of the lid is damaged. But, I was able to repair
one spool holder, so I'm good to go. There were no accessories in the tray, but
I have quite a few from my Supermatics so am good to go. The case on it has a
slight break on the back so it doesn't latch well, so I have to use a bungee
cord to keep it shut:> And the bobbin extractor is missing.
But, it came with all 18 cams, cord and foot control and sews beautifully. I'm
impressed with it!
Anyone have this model?
problems with it. 1) it has one broken spool holder and it can't be repaired
easily. The actual material on the on the inside of the lid is damaged. But, I was able to repair
one spool holder, so I'm good to go. There were no accessories in the tray, but
I have quite a few from my Supermatics so am good to go. The case on it has a
slight break on the back so it doesn't latch well, so I have to use a bungee
cord to keep it shut:> And the bobbin extractor is missing.
But, it came with all 18 cams, cord and foot control and sews beautifully. I'm
impressed with it!
Anyone have this model?
10-23-2021, 07:24 AM
#38
Super Member
Join Date: Mar 2015
Location: Denver, CO
Posts: 4,293
Welcome, bearsuk. If you have the 65, it looks like the left is the dial for the decorative stitches or for the cams (aka the stitch selector). The middle would be for the stitch width and the right would be for stitch length. I think it is interesting that the left one shows in red where the dial is set and not where the flat part is pointing to the setting. I couldn't find a free manual for this machine, but there is one that is similar, but with the knob pointing to the setting at https://www.manualslib.com/manual/37...lectronic.html
I also found a manual for download at https://manualsoncd.com/product/elna...achine-manual/ and a picture of the instructions for changing the cams/discs at https://manualsoncd.com/wp-content/uploads/319c.jpg If you click on the image, it will enlarge it.
Janey - Neat people never make the exciting discoveries I do.
Not affiliated with off-site link(s)
I also found a manual for download at https://manualsoncd.com/product/elna...achine-manual/ and a picture of the instructions for changing the cams/discs at https://manualsoncd.com/wp-content/uploads/319c.jpg If you click on the image, it will enlarge it.
Janey - Neat people never make the exciting discoveries I do.
Not affiliated with off-site link(s)
Thread
Thread Starter
Forum
Replies
Last Post
FabQuilter
For Vintage & Antique Machine Enthusiasts
3
01-24-2018 06:25 PM
QultingaddictUK
For Vintage & Antique Machine Enthusiasts
3
05-20-2014 01:49 PM
JTMinLondon
For Vintage & Antique Machine Enthusiasts
3
11-19-2012 04:23 PM
