extension table
#1
Junior Member
Thread Starter
Join Date: Apr 2010
Location: Texas
Posts: 299
I made this table from 3/4 in insulation boards. Can't take credit I seem it on u-tube. I covered the boards with warm and naural them muslin. I buy muslin by the bolts so have lots. Then covered with heavy clear table cloth fabric from walmart. I had some pictures I put under cover. It is just the right higth for quilting. I cut out for the machine and just set the machine in the hole. I was using it this a.m. and I am so proud of hoe it turned out. And the best part I made it all by myself. There is a cut out so you can chabge the bobbin. I found the gloves at office depot. Cut out the thumb and for finger. Thanks for looking.
gloves with finger cut out.
[ATTACH=CONFIG]202991[/ATTACH]
opening over throat plate
[ATTACH=CONFIG]202992[/ATTACH]
opening for lamp.
[ATTACH=CONFIG]202993[/ATTACH]
Thread
Thread Starter
Forum
Replies
Last Post
fabricluvr
Pictures
65
03-27-2012 04:30 AM