Husband made it for me!
09-07-2010, 08:41 AM
#51
Senior Member
Thread Starter
Join Date: Aug 2010
Location: McLoud, Oklahoma
Posts: 431
Originally Posted by carolynjo
Hello, ganny. Love the thread holder. However, do be careful storing fabric in a cedar chest! Cedar wood naturally has smelly oil in the wood and it will stain your fabrics. Have you ever seen old quilts with ugly brown stains on them? Most likely that was wood sap from a cedar chest or other wood. Better to wrap a carpet roll with fabric and roll your quilts on them. You can stand them up in a closet or hang the rolls from the ceiling, etc. Just be careful storing your quilts in unlined drawers or cedar chests. Thought you'd like to know.
09-07-2010, 08:43 AM
#52
Senior Member
Thread Starter
Join Date: Aug 2010
Location: McLoud, Oklahoma
Posts: 431
Originally Posted by perry
A friend gave me a cone thread holder just today. Her husband makes them. I also want a wall board, my question is what kind of material do you use?
09-07-2010, 09:44 AM
#53
Super Member
Join Date: Nov 2009
Location: Greenfield. Wisconsin
Posts: 1,512
I just made (yes Me) my own "wall board" I got the idea from this board.
I bought a long blind from Lowes and a 8 ft 1x3 board. Went home cut the board a little longer then the blind. mounted the hardware on board.
Covered the shade with flannel I used tacky spray to "glue" it on. Screwed the board to the wall put up the shade and now I have a design wall which can be pulled up our of the way when not in use.
I bought a long blind from Lowes and a 8 ft 1x3 board. Went home cut the board a little longer then the blind. mounted the hardware on board.
Covered the shade with flannel I used tacky spray to "glue" it on. Screwed the board to the wall put up the shade and now I have a design wall which can be pulled up our of the way when not in use.
09-07-2010, 04:22 PM
#56
Senior Member
Thread Starter
Join Date: Aug 2010
Location: McLoud, Oklahoma
Posts: 431
Originally Posted by champagnebubbles
I just made (yes Me) my own "wall board" I got the idea from this board.
I bought a long blind from Lowes and a 8 ft 1x3 board. Went home cut the board a little longer then the blind. mounted the hardware on board.
Covered the shade with flannel I used tacky spray to "glue" it on. Screwed the board to the wall put up the shade and now I have a design wall which can be pulled up our of the way when not in use.
I bought a long blind from Lowes and a 8 ft 1x3 board. Went home cut the board a little longer then the blind. mounted the hardware on board.
Covered the shade with flannel I used tacky spray to "glue" it on. Screwed the board to the wall put up the shade and now I have a design wall which can be pulled up our of the way when not in use.
09-08-2010, 11:03 AM
#59
Super Member
Join Date: Jul 2010
Posts: 6,430
A quick and inexpensive way to make a design wall (if you do not mind leaving it up all the time) is to purchase thin lath strips and nail them into the wall at ceiling and baseboard level. Then, nail fleece onto the top laths and pull it taut and nail it onto the bottom. The nail holes will not show when you have to remove it, but mine has been up for 9 years and is still in great shape. The quilt blocks stick just fine without using any spray. My fleece wall covers the short wall in my studio.
09-08-2010, 11:20 AM
#60
Senior Member
Thread Starter
Join Date: Aug 2010
Location: McLoud, Oklahoma
Posts: 431
Originally Posted by carolynjo
A quick and inexpensive way to make a design wall (if you do not mind leaving it up all the time) is to purchase thin lath strips and nail them into the wall at ceiling and baseboard level. Then, nail fleece onto the top laths and pull it taut and nail it onto the bottom. The nail holes will not show when you have to remove it, but mine has been up for 9 years and is still in great shape. The quilt blocks stick just fine without using any spray. My fleece wall covers the short wall in my studio.
Thread
Thread Starter
Forum
Replies
Last Post
