Sawtooth Star Block
#64
Originally Posted by oneygirl
I made this Sawtooth Star Block, and as beautiful as it is it falls short of the 12 1/2" in the directions. GRRR! This is the link I used to make the block. I really wanted it to be 12 1/2"!!! (My Bernina Activa does an accurate 1/4" seam allowance)
http://delawarequilts.com/BOMs/Sawtooth/index.html
http://delawarequilts.com/BOMs/Sawtooth/index.html
Checking the instructions you used, they recommend a true 1/4" seam allowance. You really need to use a scant quarter inch because the fold of the fabric, and the thread take up just a tiny bit of fabric. Check the finished size of your center squares, each should measure 3" square. The center 4-patch unit should measure 6" square. If they don't that will help you see how the seam allowance may be affecting the size of your blocks. You don't think that a couple of threads width in the seam allowance might make such a huge difference. <G>
Good luck,
Pati, in Phx.
#66
Love your block and the colours. I always cut my squares about 1/16" bigger to allow for the seam and stitching and measure after cutting. I also have started using Best Press' spray starch and it does make a big difference.
Thread
Thread Starter
Forum
Replies
Last Post