Janice Thompson

That is adorable. What a lucky friend

Becky Crafts

That's so neat!! What a great angel you have! :-)

KastleKitty

It is wonderful that the Quaker Oats company has seen fit to not only sell us wonderful food products, but also is so kind to provide us with a re-usable that enables us to be artistically (maybe I should say "fabric-ally"?) creative! And the second part is free!

The lowly cardboard cylinder becomes a Pincushion Sewing Kit!

KastleKitty

The first step is to find a drawer of a height that you like. I used a dresser drawer and if you look inside you can see where I wore a circle in the paper liner from cutting my containers to size. Keep in mind that the instructions supplied here are for a small size container cut to 3 3/4" tall. Your drawer will more than likely be unique. You will have to adjust your pattern height throughout. Also, pick a drawer that is flat on the top of the side so you can hold the knife flush against it securely in order to get a smooth straight cut. I could not hold the knife, turn the canister, and take a picture at the same time, and there was nobody around to take the picture for me. Use a fresh blade. It give a better cut. And it is important to have a clean even cut so the lid will fit back on. Simply hold the blade flush against the top of the drawer edge and turn the container. Keep the top on while you are doing it because it keeps the container more stable.

KastleKitty

Here are some canisters already cut, one with batting already glued to it. The batting should extend from the top edge to the bottom. Do not wrap the batting around the top edge. The lid will fit better if you don't add extra thickness. I used some poly batting that I had around. I usually use cotton, just because I like cotton. But I think that is up to you. I used scraps that I had available. In fact I think if you use different fabric scraps for each part, it would make a very cute sewing kit! Since I am relatively new to quilting I don't have very many large scraps yet, but I am working on it! LOL

Use a glue stick and rub it all over the outside of the container. Don't overlap your batting but try to make it abut evenly. If you find that you cut the batting a bit short, you can stitch it together with a lacing stitch, like shoestrings in eyelets.

The dimensions of my batting are 12 3/4" x 3 3/4". If you cut the canister a different height or use the large size, you will have to adjust your measurements accordingly.

KastleKitty

After the batting has been glued on, apply glue to the cover fabric along the edge to hold it securely while you wrap the cylinder. The overlapping edge needs a little finish, so run the gluestick along the edge and fold it under making a clean edge. Then glue stick the folded edge to hold the fabric to the canister. If you want you can use a gluegun here. I like the gluestick better because you don't have to worry about being a klutz quite so much, and that is a problem I have to deal with a lot!

KastleKitty

Next you will want to hotglue the fabric to the bottom. I could not put glue around the entire perimeter because it would harden during picture taking. But run the gluegun around the the entire perimeter and press the fabric neatly onto the glue. Do this carefully to prevent burning yourself and secondly, try to do a smooth neat job because it makes for a better appearance. I would also suggest that this might not be an appropriate craft for 11 year olds on a sugar buzz! LOL We live and learn! LOL

KastleKitty

Use the gluestick again inside the canister on the upper edge to secure the top of the fabric inside the sewing kit. This edge you want to keep as smooth as possible so the lid will fit back onto the container. I would avoid using the gluegun here because it might cause the lid to not fit well enough to close.

KastleKitty

To cover the interior I used posterboard cut to size. It is flexible enough to work with and stiff enough to hold its shape. I save all kinds of things that might be re-usable in crafting. A piece of shirt board could work if it is of sufficient size. Run glue down the two long edges, smooth the fabric neatly onto the glue. Make hospital corners to finish the two short sides. This will be turned pretty side out and slipped into the canister. I don't glue mine in. If you choose to use glue to secure it, DO NOT DO IT YET! The bottom needs to be finished first. You can just set the liner aside at this point.

KastleKitty

Next, the top! I have used wide bias tape to do this and since there are so many colors available it is a easy choice. I did not have any that matched my fabric, so I used a piece of green fabric cut on the straight of grain. The fabric I picked has a lot of give to it as you can see in the picture. Try to choose one that has a lot of give, or you can cut your own bias strip to coordinate with your other fabrics.

Run the glue stick down the center of the strip a few times to give it some hold. Gluestick one end to clean finish it like you did the fabric for the body. Starting with the unfinished edge, wrap it around the plastic part of the lid and stretch it as you go. Cut away any excess length rather than covering it over, to keep the lid fitting well. At this point I put 3 or 4 stitches in the fabric at the rim to hold it securely together.