Yes, I did. (post 315) They are so easy if you have the yo yo tool.
Teen
09-22-2018 07:28 AM
Originally Posted by lawsonmugs
(Post 8129705)
OK I tried the clear mono thread and this is a picture of what happened. I used red reg. thread in the bobbin. I used a button hole stitch. It looks like I sewed the patch on the pink fabric with red. I also sewed a straight stitch. same threads as the patch. I marked a black arrow to the straight stitching. I see very little dots of red. Am I doing something wrong. Are there some special settings or something? :mad::shock::o
Oh...Sorry that happened for you. I try to avoid using dark thread in bobbin because of this very thing. If tension is off, like in machine quilting, it will poke thru to other side. I've never used the button hole stitch with monopoly since the whole purpose of using it is for invisible stitching. Hopefully, the tension change is helping with this. May want to try a less dense stitch, as well...like a zig zag or blanket once the tension is figured out.
lawsonmugs
09-22-2018 07:32 AM
Thank You Teen I will try the tension and changing to zig zag.
WANNABEE
09-22-2018 08:13 AM
I mostly use a straight stitch.
Teen
09-22-2018 08:47 AM
1 Attachment(s)
Originally Posted by lawsonmugs
(Post 8131302)
Thank You Teen I will try the tension and changing to zig zag.
Here is a close-up of micro zig zag using monopoly. I just did this last night so it was out on my table. I do turned edge applique and this works for me. My setting is .5 width and .9 length. If you do raw edge, I would use a bit larger stitch to avoid fraying on the edge. I,also, use a 70/10 needle to avoid large needle holes. Hope this helps.