Has any made the "keep the change wallet" from stitchen sisters?
#1
Super Member
Thread Starter
Join Date: Feb 2011
Location: DC metro area
Posts: 1,286
Has any made the "keep the change wallet" from stitchen sisters?
It looks cute http://www.sewthankful.com/Keep-the-...n-Sisters.html
I have the pattern and don't really understand a couple steps and I haven't found anyone talking about it online. I usually only buy patterns if there is an example of a completed one in the store, but this time I made an impulse buy because I've been making so many of those snappy bags from the free tutorials on line...I kind of felt bad for the original designer.
I have the pattern and don't really understand a couple steps and I haven't found anyone talking about it online. I usually only buy patterns if there is an example of a completed one in the store, but this time I made an impulse buy because I've been making so many of those snappy bags from the free tutorials on line...I kind of felt bad for the original designer.
#4
Super Member
Thread Starter
Join Date: Feb 2011
Location: DC metro area
Posts: 1,286
This one has the metal tape measure closure on one of the pockets and seems like it should be straightforward.
But 1 pattern piece is called different things, on the pattern it's the back pocket and the written instructions call it the outside pocket. Process of elimination, it's probably the same.
The inside pocket is the only pattern piece that says cut 1 interfacing. Yet, on the front page under preparation and cutting instructions we are told to layer 2 fat quarters and interfacing and trace pattern pieces for outside, lining and 2 inside pockets then cut out. So does every piece need interfacing?
The inside pocket pattern piece has written on the pattern: cut 1 fabric, 1 lining and 1 interfacing, but later the instuctions say "if you use a magnetic snap closure you may want to interface the top half" So, am I double interfacing that piece on the top? Am I cutting 2 inside pockets from both fabric and lining?
I guess this is why they say to read the instructions through first before you start cutting.
I'm used to pattern pieces saying, "cut 1 focus fabric, cut one lining, cut 1 interfacing, cut 2 fusible fleece etc" Maybe I'm over thinking this, but I feel a pattern I paid $9 for, it should be better then a free pattern I get off someone's blog. It could be me also, I so used to the indepth color photos and directions on different blogs that when it's condensed to 2-3 pages with black and white sketches of the steps I'm not sure what I'm looking at.
But 1 pattern piece is called different things, on the pattern it's the back pocket and the written instructions call it the outside pocket. Process of elimination, it's probably the same.
The inside pocket is the only pattern piece that says cut 1 interfacing. Yet, on the front page under preparation and cutting instructions we are told to layer 2 fat quarters and interfacing and trace pattern pieces for outside, lining and 2 inside pockets then cut out. So does every piece need interfacing?
The inside pocket pattern piece has written on the pattern: cut 1 fabric, 1 lining and 1 interfacing, but later the instuctions say "if you use a magnetic snap closure you may want to interface the top half" So, am I double interfacing that piece on the top? Am I cutting 2 inside pockets from both fabric and lining?
I guess this is why they say to read the instructions through first before you start cutting.
I'm used to pattern pieces saying, "cut 1 focus fabric, cut one lining, cut 1 interfacing, cut 2 fusible fleece etc" Maybe I'm over thinking this, but I feel a pattern I paid $9 for, it should be better then a free pattern I get off someone's blog. It could be me also, I so used to the indepth color photos and directions on different blogs that when it's condensed to 2-3 pages with black and white sketches of the steps I'm not sure what I'm looking at.
#5
Super Member
Join Date: Jun 2010
Location: The Deep South near Cajun Country, USA
Posts: 5,434
I hate patterns that are like the one you described. I always want to contact whoever designed the pattern & give he/she my comments, then ask....did anyone test this pattern? Sometimes, corrections that are found after a pattern has been printed are posted on a website by the person authoring the pattern. I did a search in Yahoo & came up with this website that has a "contact me" tab. http://stitchinsis.com/catalog/ I would ask them these questions you are asking of us. They will know what they intended for the pattern to say. Hope you get an answer.
#6
Super Member
Thread Starter
Join Date: Feb 2011
Location: DC metro area
Posts: 1,286
I did a couple weeks ago. I first asked if they had a better picture of it of all sides because I was having problems and received a very nice reply where she gave me more information within a few days. I sent her back an email with all my specific questions and haven't heard back yet. I guess I could send it again and ask if she received it, it could have gone to junk mail or got lost. I may wait until after the holidays, they may be busy now. Oh, you know, maybe you're right, the first message I sent through their website and then the second I replied to the email. Maybe I should go through the website again....thanks for the suggestion. I didn't think about that.
I was hoping someone on this forum had made it
I was hoping someone on this forum had made it
Last edited by charity-crafter; 12-08-2012 at 04:39 AM.
#7
It looks cute http://www.sewthankful.com/Keep-the-...n-Sisters.html
I have the pattern and don't really understand a couple steps and I haven't found anyone talking about it online. I usually only buy patterns if there is an example of a completed one in the store, but this time I made an impulse buy because I've been making so many of those snappy bags from the free tutorials on line...I kind of felt bad for the original designer.
I have the pattern and don't really understand a couple steps and I haven't found anyone talking about it online. I usually only buy patterns if there is an example of a completed one in the store, but this time I made an impulse buy because I've been making so many of those snappy bags from the free tutorials on line...I kind of felt bad for the original designer.
#9
Super Member
Thread Starter
Join Date: Feb 2011
Location: DC metro area
Posts: 1,286
I figured out my problem! Yeah! One of the pattern pieces is labeled weird. So you do cut a lg inside pocket and a smaller inside pocket.
Thanks Linda for suggesting just do it step by step.
My suggestions if you are doing this for a first time is label everything top and bottom. It may seem obvious which is the top and bottom but when I finally turned everything inside out I realized I had stiched the inside pocket upside down. And I didn't have the second smaller pocket, just sort of winged it to figure it out. And yes, everything is interfaced.
And again, you need to figure out your tape measure according to the earlier link. She says put the numbers facing each other, but mine is the opposite.
Sometimes it helps to explain what the problem is then look at it again. Thanks everyone.
Thanks Linda for suggesting just do it step by step.
My suggestions if you are doing this for a first time is label everything top and bottom. It may seem obvious which is the top and bottom but when I finally turned everything inside out I realized I had stiched the inside pocket upside down. And I didn't have the second smaller pocket, just sort of winged it to figure it out. And yes, everything is interfaced.
And again, you need to figure out your tape measure according to the earlier link. She says put the numbers facing each other, but mine is the opposite.
Sometimes it helps to explain what the problem is then look at it again. Thanks everyone.
Last edited by charity-crafter; 12-08-2012 at 06:14 PM.
Thread
Thread Starter
Forum
Replies
Last Post
bearisgray
General Chit-Chat (non-quilting talk)
65
02-01-2024 09:04 AM
Halfsquare
Offline Events, Announcements, Discussions
8
09-30-2011 06:08 PM