Odd machine, does anyone recognise it?
#11
Tammi, It's not a Singer. When people refer to old machines as Singers they just say that because they are black. Happens all the time.
There's no point in trying to relate the serial number to Singer numbers. The machine is a Vibrating Shuttle. They were not produced by Singer until the mid 1880s.
I have gone through all the photos on Needlebar of other European machines and found no match. I still say it's German - I would be surprised to learn it was anything else.
There's no point in trying to relate the serial number to Singer numbers. The machine is a Vibrating Shuttle. They were not produced by Singer until the mid 1880s.
I have gone through all the photos on Needlebar of other European machines and found no match. I still say it's German - I would be surprised to learn it was anything else.
Thanks for the mid 1880s reference. I didn't know when they started with them. That must mean there were very few VS1 machines before the VS2 replaced it. No wonder they're so hard to find.
I still think German too. I read somewhere yesterday that around one of the wars, the plates were pried off a lot of "Berlin" machines, so that they could be sold elsewhere. I see the possibility of 2 holes right under the winder.... if this is one of them, it will be very difficult to identify for sure. The holes do look very close together though.
Not saying Muv is wrong but the only ones I've found on Needlebar with that lever on the pillar for stitch length are British (Vickers) and Australian?!?!
http://needlebar.org/cm~nb/displayimage.php?album=257&pos=3
http://needlebar.org/cm~nb/displayimage.php?album=337&pos=20
http://needlebar.org/cm~nb/displayimage.php?album=411&pos=25
http://needlebar.org/cm~nb/displayimage.php?album=495&pos=8
http://needlebar.org/cm~nb/displayimage.php?album=257&pos=3
http://needlebar.org/cm~nb/displayimage.php?album=337&pos=20
http://needlebar.org/cm~nb/displayimage.php?album=411&pos=25
http://needlebar.org/cm~nb/displayimage.php?album=495&pos=8
Doesn't Needlebar have a kitten when we refer people to their resources over there? I thought I remembered a discussion here, and there both, before I gave up on NB.
I haven't told DH yet, but I figure I sold the 15-91 this weekend, this can't weigh as much, we're less likely to need those teleposts he keeps talking about...
#12
I didn't know that the folks at Needlebar were like that. Certainly if they don't want people not directly associated with Needlebar to access things they need to strip them from the search engines. I think the gallery is dead anyway - I don't remember seeing anything that's been updated since 2009 or something like that.
#13
I didn't know that the folks at Needlebar were like that. Certainly if they don't want people not directly associated with Needlebar to access things they need to strip them from the search engines. I think the gallery is dead anyway - I don't remember seeing anything that's been updated since 2009 or something like that.
I couldn't find the posts I was thinking of, but it strikes me it was in the C'mon in and sit a spell thread. There was also a thread on NB that they were complaining about people (not the QB directly) using their stuff around the time I joined, in the summer sometime. Charlee did do a post about a discussion that she had with the owner of the forums, he seemed more reasonable than what I'd believed from reading other accounts on both sides. http://www.quiltingboard.com/persona...r-t159913.html
Maybe it's not as big a deal as I thought.
#14
Hello Tammi and PinkCastle,
Vickers machines have the serial number behind the pillar, and they don't have that type of bobbin winder, which I have only seen on German machines.
I can well imagine that a German manufacturer's plate would be taken off this machine in Holland when war came. I often wonder whether the reason that my beautiful 1936(ish) Vesta, which has MADE IN GERMANY in bold lettering on the pillar, was shoved away into a cupboard by the owner because they couldn't stand the sight of it. It looks as though it was barely used.
Vickers machines have the serial number behind the pillar, and they don't have that type of bobbin winder, which I have only seen on German machines.
I can well imagine that a German manufacturer's plate would be taken off this machine in Holland when war came. I often wonder whether the reason that my beautiful 1936(ish) Vesta, which has MADE IN GERMANY in bold lettering on the pillar, was shoved away into a cupboard by the owner because they couldn't stand the sight of it. It looks as though it was barely used.
Last edited by Muv; 11-27-2012 at 01:21 PM.
#16
Hello Tammi and PinkCastle,
Vickers machines have the serial number behind the pillar, and they don't have that type of bobbin winder, which I have only seen on German machines.
I can well imagine that a German manufacturer's plate would be taken off this machine in Holland when war came. I often wonder whether the reason that my beautiful 1936(ish) Vesta, which has MADE IN GERMANY in bold lettering on the pillar, was shoved away into a cupboard by the owner because they couldn't stand the sight of it. It looks as though it was barely used.
Vickers machines have the serial number behind the pillar, and they don't have that type of bobbin winder, which I have only seen on German machines.
I can well imagine that a German manufacturer's plate would be taken off this machine in Holland when war came. I often wonder whether the reason that my beautiful 1936(ish) Vesta, which has MADE IN GERMANY in bold lettering on the pillar, was shoved away into a cupboard by the owner because they couldn't stand the sight of it. It looks as though it was barely used.
Hey Muv, that's brings up a good point, and something I was using when looking for a match. Do you have recommendations of brands that had the serial number below the pillar like this machine and the Singers did?
I've seen your Vesta, it's gorgeous. It could be it was stuffed in a cupboard somewhere. It looks like there's no sun damage to it either.
ETA: This is the photo that created doubt for me about the Singer thing early on, but I got over it.
http://www.ismacs.net/singer_sewing_...arnations.html
Photos 2 - 3 show a lovely model 12 with a similar bobbin winder. Similar, but not close enough.
Those were my first two clues too. I've seen some of the F&R machines with that screw screwed partially out and it looks like there's a spring under it. I'd sure like to get my hands on this machine to see if I can figure out what that's about.
Last edited by ArchaicArcane; 11-27-2012 at 01:46 PM.
#17
Still looking around when I have the time.
#18
It could be it was stuffed in a cupboard somewhere. It looks like there's no sun damage to it either.
I've seen some of the F&R machines with that screw screwed partially out and it looks like there's a spring under it. I'd sure like to get my hands on this machine to see if I can figure out what that's about.
I've seen some of the F&R machines with that screw screwed partially out and it looks like there's a spring under it. I'd sure like to get my hands on this machine to see if I can figure out what that's about.
Sun? What's that? I'm in England. It's a rare commodity.
By shovelhead, do you mean the front inspection plate? It has a set of mini tension discs to put the thread through when winding a bobbin. That must be what you mean by the sticking out screw.
#19
Thank you! I've been doing the same.
LOL! We've been the same the last month or so, but mostly snow and bleak, not rain. Either way, I'm not getting a lot of natural vitamin D right now either. When I used to go to the Coast for the summers and Christmas, I always longed for home (the wide open prairies) when it would rain for days on end. I can just imagine living on an island!
Yep,. the shovel head is exactly that. It always reminds me of one of the shovels we use in the garden, or on the ice, or something. Thanks for the clarification! I couldn't tell they were tension disks from the photos I have seen. That makes so much sense! You wouldn't have to hold the thread to tension it, like I was taught to on the Singers!
LOL! We've been the same the last month or so, but mostly snow and bleak, not rain. Either way, I'm not getting a lot of natural vitamin D right now either. When I used to go to the Coast for the summers and Christmas, I always longed for home (the wide open prairies) when it would rain for days on end. I can just imagine living on an island!
By shovelhead, do you mean the front inspection plate? It has a set of mini tension discs to put the thread through when winding a bobbin. That must be what you mean by the sticking out screw.
#20
Shovel head = front inspection plate
Sticking out screw :-) = the screw holding the front inspection plate onto the machine
best,
d
QUOTE=Muv;5683965]Sun? What's that? I'm in England. It's a rare commodity.
By shovelhead, do you mean the front inspection plate? It has a set of mini tension discs to put the thread through when winding a bobbin. That must be what you mean by the sticking out screw.[/QUOTE]
Sticking out screw :-) = the screw holding the front inspection plate onto the machine
best,
d
QUOTE=Muv;5683965]Sun? What's that? I'm in England. It's a rare commodity.
By shovelhead, do you mean the front inspection plate? It has a set of mini tension discs to put the thread through when winding a bobbin. That must be what you mean by the sticking out screw.[/QUOTE]
Thread
Thread Starter
Forum
Replies
Last Post
ArchaicArcane
For Vintage & Antique Machine Enthusiasts
35
09-23-2015 08:35 PM
Littlebearquiltingboard
For Vintage & Antique Machine Enthusiasts
17
03-31-2014 08:34 AM
ArchaicArcane
For Vintage & Antique Machine Enthusiasts
6
08-02-2012 11:33 AM