Sandwiching issues.....help?
#11
Super Member
Join Date: Sep 2009
Location: Massachusetts, USA
Posts: 1,775
Originally Posted by lneal
The spray adhesive allows you to pick up your material and readjust without applying more spray. Always spray the batting not the fabric. That is what my lqs told me to do. This is how I do it; Lay down my batting on my table, adjust my backing to fit the batting. I fold backing material half way back to spray the batting, smooth out backing and do the other half. If I need to adjust I pick up fabric and smooth with my hand. Then I turn it over, with batting on top I lay down my quilt top and do the same. Then I pin randomly. It always works for me.
Before I start to baste all 3 layers together I tape the backing to the table so that it stays in place while I put the other 2 layers on top and then either use pins to baste it or baste it with thread.
#13
Power Poster
Join Date: Jul 2008
Location: East Oklahoma - pining for Massachusetts
Posts: 10,477
When I get ready to do my sandwich, I use the big tables at church. I tape down the back, using masking tape at about every 7 inches. I adjust it to make sure it is totally flat. If I mess this up my quilt will be the same. I have tried doing this at home but it does not come out as well. Once I had to take all the pins out and start over because I was not happy with the result.
I do hope this helps you. I know how it feels to rip out more than once.
I do hope this helps you. I know how it feels to rip out more than once.
#14
I take my quilt tops, batting and backing to my mom. She is a long arm quilter. She puts them on the machine and bastes them for me. She sets her stitch length as long as she can get it and uses her odds and ends of thread. Then I can hand quilt them on my Q-snap floor frame and remove the basting stitches when I am done. It saves all that crawling around the floor.
#15
Super Member
Join Date: Aug 2009
Location: The middle of an IL cornfield
Posts: 7,014
If you don't have a big table and must crawl on the floor, get knee pads. Some husbands have them. They think they are for laying floor tile. If you can't swipe them off your husband, go to the sports store and buy cheap volleyball knee pads. Best money ever spent for sandwhiching on the floor.
#16
Super Member
Join Date: Dec 2009
Location: Ohio
Posts: 2,929
Originally Posted by lneal
The spray adhesive allows you to pick up your material and readjust without applying more spray. Always spray the batting not the fabric. That is what my lqs told me to do. This is how I do it; Lay down my batting on my table, adjust my backing to fit the batting. I fold backing material half way back to spray the batting, smooth out backing and do the other half. If I need to adjust I pick up fabric and smooth with my hand. Then I turn it over, with batting on top I lay down my quilt top and do the same. Then I pin randomly. It always works for me.
#17
I have never heard of doing it this way . I like it because then you can see if there are any puckers in the back first. Is this better then taping the backing down and do the way everyone else does. This the way I do it and most time after releasing the tape I find puckers in the backing. I am going to try this.
#18
When I make the sandwich, I using masking tape or painters tape to tape the backing to the floor. I use the rubber kneeling pad or sit on the floor when I can. Then lay the batting over the backing and smooth it out with you hands. Finally, lots of safety pins - every couple inches to hold the sandwich together. I machine quilt and my backings come out perfect. Start from the center & work out.
#20
Originally Posted by MarthaVA
Hi. I'm new to quilting. I am making a quilt for my daughter, and I have hand quilted the 3 sections - 3 times. I've had to tear out the stitches - 3 times. :evil:
The first time I tried machine quilting but the stitches kept coming out way too close together - after 2 rows I decided it wasn't good so I would hand quilt it.
I am sewing my rows about 4 inches apart, on the diagonal. I don't know if this makes any difference.
The next time I sewed (by hand) I finished all of the stitching and laid the quilt out flat. I realized that the fabric was not laying flat on the backing. :(
I tore it all out, started again.
I sewed about 5 or 6 rows, and checked the back. Same thing.
I know it must have to do with the way I'm sandwiching. The first time and second time, I had pinned it all together after laying it on the floor. That was really hard for me - being on the floor and trying to get it all done. Hard on the knees and the back.
I also had not used a hoop the second time.
The third time, I didn't pin it but hand basted it lengthwise and widthwise. I don't think I used enuf basting.
I also used a hoop the third time. That didn't help.
My next step is to lay out the backing, tape it down, spray it w/adhesive, then lay down the batting, spray with adhesive, then the top. My only problem is, I'm afraid to take this next step because if I get it wrong again, I'm afraid I'll ruin the quilt with the spray adhesive.
HELP????
Thanks.
Martha
The first time I tried machine quilting but the stitches kept coming out way too close together - after 2 rows I decided it wasn't good so I would hand quilt it.
I am sewing my rows about 4 inches apart, on the diagonal. I don't know if this makes any difference.
The next time I sewed (by hand) I finished all of the stitching and laid the quilt out flat. I realized that the fabric was not laying flat on the backing. :(
I tore it all out, started again.
I sewed about 5 or 6 rows, and checked the back. Same thing.
I know it must have to do with the way I'm sandwiching. The first time and second time, I had pinned it all together after laying it on the floor. That was really hard for me - being on the floor and trying to get it all done. Hard on the knees and the back.
I also had not used a hoop the second time.
The third time, I didn't pin it but hand basted it lengthwise and widthwise. I don't think I used enuf basting.
I also used a hoop the third time. That didn't help.
My next step is to lay out the backing, tape it down, spray it w/adhesive, then lay down the batting, spray with adhesive, then the top. My only problem is, I'm afraid to take this next step because if I get it wrong again, I'm afraid I'll ruin the quilt with the spray adhesive.
HELP????
Thanks.
Martha
Thread
Thread Starter
Forum
Replies
Last Post