Quilt as you go
#21
#22
I started using QAYG earlier this year and love it. It's worth the time to learn the process and there are more than one way to do it. Experiment with some orphan blocks to see what works for you and go for it. Under the challenge section here in QB there is a thread for orphan blocks that has a couple if methods too. That's where I started.
#23
Quilt As You Go
I am making my first queen size quilt using the quilt as you go method. I have my squares done and am ready to sandwich and start the quilting process. I am wondering if any of you would be willing to share photos of quilts you have done using the QAYG method. It would be so helpful and maybe give me some ideas on how to do the actual quilting. Thanks so much!!
Lucy
Lucy
Please, please do not do quilt as you go in individual blocks. It's an absolute crazy maker trying to join four quilted corners together, especially on the back. That is the reason I wrote my first book, Quilt-As-You-Go, back in 1983 and its second edition 5 years later. All told, the books were in print for 15 years and my method got rave reviews. Instead, sew the blocks into long strips. For instance, if the quilt is 4 x 5 blocks, sew 4 strips of five blocks. Cut the batt the same size and the backing slightly larger. Baste together as normal. You can quilt it in a frame similar to a needlepoint frame, rolling the quilt as you go. Start in the center of the strip to quilt and go to one end, then roll back to the center and quilt to the other end. The only accommodation you need to make is stop quilting ½ inch from the joining seams. Leave threads hanging so that the quilting can be hand finished, or tied off and machine quilted. When two strips are quilted, join the top as you would normally, then butt the batting edges together so they lay flat (trim if necessary) and whip stitch with a loose tension and white thread (you don't have to outline quilt). The final step is to lay one side of the backing flat, lay the adjoining backing edge over it, fold the raw edge under, trim if necessary and hand stitch the edges down, catching into the batt, but not the top. The final step is to finish the quilting over the seam lines.
The ONLY difference with this type of assembly is that you have seams where every strip is joined, but you usually have back joining seams anyway. From the top, the quilt is identical. And you have a portable project that joins with straight seams--no matching corners. Even machine quilting can be done with this method. No forcing a large quilt through a small machine throat.
Good luck.
SandyQuilter
#24
Please post the pictorial tutorial. It would be great if you could share this technique.
The backing on each block is 1/2 inch larger all around than the top. I then quilt the squares. To join them, I sew two block tops together, press the seam to one side (I invested in a small hand held iron to do this), then lay the batting flat so that one side overlaps the other. On the side that overlaps, I trim the batting so that the two pieces lay flush against each other and then add heat set batting tape. Then, fold one side of backing over the batting, mark the center fold line, and fold the other side of backing down to the line. I set it with the iron and glue baste it in place. From there, I hand stitch the seams closed. The back looks great and I'm pleased with this method. The original instructions had you SID the backing closed, but this only works when joining two blocks. When you add the next row, you don't have the seam allowances to work with, so SID was not an option. I hope this makes sense. I can post a picture tutorial if you would like since I'm joining blocks tonight.
#29
Only way I have made a quilt yet, finished one and have 3 more "UFOs". 2 of the UFOs are the Cotton Method, with all the folding and extra sewing they are "heavy" quilts. The one that is my avitar didn't have a "name" for the method but it is as Ranchwife descripes it. I did do the SITD for all and ended up going back and doing "hand" sewing where I missed when joining rows. It was a little easier, but still a heavy quilt. I think if I ever do another one it will be quilted by row and combined using another idea I saw on this board with an accompanying tute.
Last edited by MartiMorga; 05-03-2013 at 08:04 AM.
#30
Senior Member
Join Date: Feb 2013
Location: NE California - no where near the Bay Area!
Posts: 346
Thread
Thread Starter
Forum
Replies
Last Post
ruby2shoes
Main
25
09-20-2015 04:01 PM
AngieS
Links and Resources
11
10-07-2011 04:58 PM
craftybear
Main
25
09-18-2011 03:23 PM
Fab-ra-holic
General Chit-Chat (non-quilting talk)
42
06-22-2011 09:23 AM