Vintage Sewing Machine Shop.....Come on in and sit a spell
A friend and I went to Eugene to just to go to thrift stores without the hubby's!! Since I've been wanting a cheep machine that I didn't feel like I could ruin I figured $9.99 was cheep enough. Have now seen one of these mentioned on here before but that could mean I just forgot!! After I carried the HEAVY thing to the counter she only charged me $8.00 and some change. (Senior discount) I had plugged it in at the store and it ran. After getting home I noticed it had had a Singer foot peddle put on it. That is plastic so I knew it wasn't the one that came with the machine.
The writing is in fancy lettering and as near as I can figure out it says
RH Macy & Co
??
New York
On the end of the arm it says " The Eldredge Rotary Manufactured by National Sewing Machine Co. Belvidene, Ill.
Now Charlee, you told me once what the feet we called for my "New Home" and this has the same kind. Please tell me again so I can write it down this time and then I can forget where I put it!!!
Got to find a needle for it (I hope) and see if I can figure out how to thread it. Then if it works will try to sweet talk hubby to build a case for it.
If any of you know anything about this machine please let me know.
The writing is in fancy lettering and as near as I can figure out it says
RH Macy & Co
??
New York
On the end of the arm it says " The Eldredge Rotary Manufactured by National Sewing Machine Co. Belvidene, Ill.
Now Charlee, you told me once what the feet we called for my "New Home" and this has the same kind. Please tell me again so I can write it down this time and then I can forget where I put it!!!
Got to find a needle for it (I hope) and see if I can figure out how to thread it. Then if it works will try to sweet talk hubby to build a case for it.
If any of you know anything about this machine please let me know.
Hey, I have been off for a week and look at you guys! Geeze! I have several pages of catching up to read!
Nope I don't have that Morse anymore! It was one I sold at the Community Yard sale for $40 last week! Very nice Japanese 15 - great machine - I just had to thin out my machines so it was one that I thinned! I have sold or given away 7 machines in the last month - only gained one! I am down to around 50 machines - give or take a couple! Now I can look for more of the ones I really really like!
Nancy
Nope I don't have that Morse anymore! It was one I sold at the Community Yard sale for $40 last week! Very nice Japanese 15 - great machine - I just had to thin out my machines so it was one that I thinned! I have sold or given away 7 machines in the last month - only gained one! I am down to around 50 machines - give or take a couple! Now I can look for more of the ones I really really like!
Nancy
Last edited by BoJangles; 08-01-2012 at 08:09 PM.
I think I have another 401A, a 403, a 411G, a 401G and a very bad 500. I need to get rid of all but the 403 and the 401G. I have way too many machines. I think I have 3 301s - those gotta go. Way too many clones and Kenmores. I like fixing them... after that I'm done for the most part. Sort of like Sudoku - do the puzzle and then go do another puzzle.
Anyway, you said you have 3 301's. Are any of them the two tone?
Nancy
As for finding a cheep machine I felt like I could take apart---not going to happen!!! I've played with it this evening, found a needle and then got brave and stepped on the peddle. It took off like it was going to the races. Had to play with the tension and by the time I got that adjusted I had the foot peddle figured out and could slow it down quite a bit. So no taking this one apart either. The only thing is you can't lower the feed dogs to quilt, but if it is like my Huskystar I can quilt on it with them up. Now I will need to figure out some kind of a base for it. I remember a post on here someplace where someone had built a bottom to put one in. Will need to see if I can find that and then find a place to put this exciting find! Thanks Charlee and if these new feet have a name let me know because they are different.
Power Poster
Join Date: Mar 2011
Location: Somewhere
Posts: 15,506
Yes Charlee it was "top clamp" and I did try one of those and also the regular foot for the New Home and they won't work. Just a tad bit to narrow so now I guess I need to remember a new name huh???
As for finding a cheep machine I felt like I could take apart---not going to happen!!! I've played with it this evening, found a needle and then got brave and stepped on the peddle. It took off like it was going to the races. Had to play with the tension and by the time I got that adjusted I had the foot peddle figured out and could slow it down quite a bit. So no taking this one apart either. The only thing is you can't lower the feed dogs to quilt, but if it is like my Huskystar I can quilt on it with them up. Now I will need to figure out some kind of a base for it. I remember a post on here someplace where someone had built a bottom to put one in. Will need to see if I can find that and then find a place to put this exciting find! Thanks Charlee and if these new feet have a name let me know because they are different.
As for finding a cheep machine I felt like I could take apart---not going to happen!!! I've played with it this evening, found a needle and then got brave and stepped on the peddle. It took off like it was going to the races. Had to play with the tension and by the time I got that adjusted I had the foot peddle figured out and could slow it down quite a bit. So no taking this one apart either. The only thing is you can't lower the feed dogs to quilt, but if it is like my Huskystar I can quilt on it with them up. Now I will need to figure out some kind of a base for it. I remember a post on here someplace where someone had built a bottom to put one in. Will need to see if I can find that and then find a place to put this exciting find! Thanks Charlee and if these new feet have a name let me know because they are different.
Power Poster
Join Date: Mar 2011
Location: Somewhere
Posts: 15,506
Miriam, I am very sorry to hear about your shoulder! Are you sure it is not a rotator cuff problem? I thought I had dislocated my shoulder and it turns out I have two small tears in the shoulder - this is from a very large/fractious horse who use to pull me off my feet when I did ground work with him!
Anyway, you said you have 3 301's. Are any of them the two tone?
Nancy
Anyway, you said you have 3 301's. Are any of them the two tone?
Nancy
I have (3) 301s. A mocha long bed and a mocha short bed and a very nice 2 tone. The long bed is in a case the other two have cradles. My sister has 2 or 3 too - I think she got a couple black. I'm not keeping mine. I like my clone better.
Yes Charlee it was "top clamp" and I did try one of those and also the regular foot for the New Home and they won't work. Just a tad bit to narrow so now I guess I need to remember a new name huh???
As for finding a cheep machine I felt like I could take apart---not going to happen!!! I've played with it this evening, found a needle and then got brave and stepped on the peddle. It took off like it was going to the races. Had to play with the tension and by the time I got that adjusted I had the foot peddle figured out and could slow it down quite a bit. So no taking this one apart either. The only thing is you can't lower the feed dogs to quilt, but if it is like my Huskystar I can quilt on it with them up. Now I will need to figure out some kind of a base for it. I remember a post on here someplace where someone had built a bottom to put one in. Will need to see if I can find that and then find a place to put this exciting find! Thanks Charlee and if these new feet have a name let me know because they are different.
As for finding a cheep machine I felt like I could take apart---not going to happen!!! I've played with it this evening, found a needle and then got brave and stepped on the peddle. It took off like it was going to the races. Had to play with the tension and by the time I got that adjusted I had the foot peddle figured out and could slow it down quite a bit. So no taking this one apart either. The only thing is you can't lower the feed dogs to quilt, but if it is like my Huskystar I can quilt on it with them up. Now I will need to figure out some kind of a base for it. I remember a post on here someplace where someone had built a bottom to put one in. Will need to see if I can find that and then find a place to put this exciting find! Thanks Charlee and if these new feet have a name let me know because they are different.
In a lot of ways it would be nice if you lived closer BUT then I bet I would really be in hot water and need a bigger house. LOL Is there a picture of the table someplace so I know what to keep my eyes open for. Also I don't know what you mean by the "wheel turn back when I run it"? The stitch size lever does push up for reverse if that is what you are asking but something tells me that is not what you are saying!
Also it is not as deep or it doesn't slide in as far. Clear as mud right???
Last edited by crewsemj; 08-02-2012 at 07:46 AM.
OK Charlee he measured them and they are so close that even with the magnifying glass we neither one can read the marks (and he just got new glasses) But the depth of each one is different. New Home depth is 3/8 and the Macy is 5/16. Don't go to to much work to figure this out because I will probably only use it for quilting. Would love to do FMQing with it but I figure there is not a foot for doing that.
Thread
Thread Starter
Forum
Replies
Last Post
Stitchnripper
Main
5
10-17-2018 09:01 AM
AngieS
Main
38
10-06-2011 10:06 PM
craftybear
Offline Events, Announcements, Discussions
34
09-09-2011 12:36 PM