Cleaning and repairing the Shellac clear coat on Vintage sewing machine heads
#671
Member
Join Date: Aug 2018
Location: Wisconsin
Posts: 20
Glenn, I have a 50s machine that the finish has yellowed extremely, will the french polish lighten this up some or is there another method for this. It is a blue machine that is now green because of the yellowing. I thought at first like some of my other machines it was just oil and soaked it good with the hand cleaner I like to use that usually works and have used on other machines but it did not come off except with a wet sand like you would do to a car finish clear coat. I tried it in a spot only. Thanks for any help you can give me. L
#672
Super Member
Thread Starter
Join Date: Mar 2010
Location: Huntsville, AL
Posts: 2,609
Glenn, I have a 50s machine that the finish has yellowed extremely, will the french polish lighten this up some or is there another method for this. It is a blue machine that is now green because of the yellowing. I thought at first like some of my other machines it was just oil and soaked it good with the hand cleaner I like to use that usually works and have used on other machines but it did not come off except with a wet sand like you would do to a car finish clear coat. I tried it in a spot only. Thanks for any help you can give me. L
#674
Member
Join Date: Aug 2018
Location: Wisconsin
Posts: 20
Thanks Glenn. I tried dawn already the only thing takes it off so far is a wet sand. It is a lot of work to wet sand when your hands are not what they used to be and visited by Arthur Itis. I guess if that is my choice I will go with it. Thanks again for trying to help!
#676
Member
Join Date: Aug 2018
Location: Wisconsin
Posts: 20
There were only a few decals and I avoided them as much as I could, I made stencils of the decals in paper and then taped over them to protect what I could. It did not turn out too bad, but still had some yellowed places that looked more green than blue. The bed looked nice however. Sometimes you sacrifice a machine to learning, that is why you don't do it on anything but a machine that needs more tlc than you can give it.
Last edited by Glowygirl2; 12-01-2018 at 04:58 PM.
#677
Member
Join Date: Dec 2017
Posts: 8
I think that he meant PB Blaster, not Plat Buster.
PB Blaster is probably, IMHO, the pest penetrating oil on the market for loosening rusty bolts/parts.
PB Blaster is available at most auto parts stores, Amazon and even WallyWorld(Walmart).
Last edited by QuiltnNan; 04-24-2019 at 11:11 AM. Reason: remove copyright pic, should have used link
Thread
Thread Starter
Forum
Replies
Last Post
Glenn
For Vintage & Antique Machine Enthusiasts
105
06-17-2023 07:05 AM
smokeythecat
For Vintage & Antique Machine Enthusiasts
3
03-22-2018 11:58 AM
Redsquirrel
For Vintage & Antique Machine Enthusiasts
3
10-12-2014 09:00 AM
Glenn
For Vintage & Antique Machine Enthusiasts
35
07-03-2014 08:44 PM