Cleaning and repairing the shellac clear coat on vintage sewing mcahines
#72
Super Member
Thread Starter
Join Date: Mar 2010
Location: Huntsville, AL
Posts: 2,609
Hi Miriam, I would use finger nail polish remover. It has some oil in it so it will not be hard on the finish. Although it is acetone the oil in it will help. If you use pure acetone it will remove the shellac. Go easy with a Q-tip.
#73
Banned
Join Date: Aug 2014
Location: Victorian Sweatshop Forum
Posts: 4,096
Cari
#74
Super Member
Thread Starter
Join Date: Mar 2010
Location: Huntsville, AL
Posts: 2,609
It might but the non acetone remover is for the acrylic polish not the the old lacquer polish. So you will have to try it to see if it will remove the polish. If the polish is on an old balck machine I am sure it might be the old finger nail polish. I hope it works.
#76
Super Member
Thread Starter
Join Date: Mar 2010
Location: Huntsville, AL
Posts: 2,609
Cari are you saying the non acetone nail polish remover will remove any nail polish? If this is so this would be great. Not knowing anything about nails I always just use my wife's polish remover. I need to go read the label. I just know the old polish was lacquer then again what to I know about nails.
#77
Banned
Join Date: Aug 2014
Location: Victorian Sweatshop Forum
Posts: 4,096
Yep, I never had a problem removing any nail polish with non acetone remover and I had every kind you can think of. I went for color, not loyal to any brand. Some polishes I had were 30+ years old(think the old Avon stuff). Acetone remover works quicker with dark colors but the non acetone does work. Since they changed all the nail polish formulas to remove the carcinogens several years ago, some of the cheap stuff can be removed just by washing dishes or taking a shower if you don't clear coat it.
Cari
Cari
Last edited by Cari-in-Oly; 01-03-2015 at 01:19 PM.
#79
I know this thread is quite old but I wanted to chime in with my experience. I took denatured alcohol to the head of a 201 without minding the decals at all. My pad was soaked with the stuff. It immediately turned my gold decals to silver! I couldn't believe what I was seeing. I obviously didn't know what I was doing and I thought the denatured alcohol would do no harm! Oops! It is fine, I just have an original Singer 201 with silver decals. Live and learn, as they say!
#80
Member
Join Date: Mar 2016
Posts: 1
Hi Glenn,
To put new decals on the machine do I;
1. lightly sand decal areas
2. buff the area
3. apply decals
4. apply shellac
5. apply polish and wax.
Is this a correct procedure?
Also, where is the best place to get decals for my 201-2 1948 Singer?
Thanks,
Frank
To put new decals on the machine do I;
1. lightly sand decal areas
2. buff the area
3. apply decals
4. apply shellac
5. apply polish and wax.
Is this a correct procedure?
Also, where is the best place to get decals for my 201-2 1948 Singer?
Thanks,
Frank
Thread
Thread Starter
Forum
Replies
Last Post
Glenn
For Vintage & Antique Machine Enthusiasts
718
07-07-2024 05:15 AM
smokeythecat
For Vintage & Antique Machine Enthusiasts
3
03-22-2018 11:58 AM
Redsquirrel
For Vintage & Antique Machine Enthusiasts
3
10-12-2014 09:00 AM
Glenn
For Vintage & Antique Machine Enthusiasts
35
07-03-2014 08:44 PM