How would you sew this, I'm winging it with no instructions
#1
How would you sew this, I'm winging it with no instructions
All the blocks are finished and I'm happy with it. Do I sew each row across then attach each row to each other. Or do i sew each column and sew the columns together? There are too many possibilities to list. How would you start sewing the blocks to each other.
#4
Super Member
Join Date: Dec 2010
Location: New York City/Manhattan
Posts: 1,316
I have a less than usual method developed. For me, I get better accuracy having only one full seam to sew across the quilt. Your piece is 8x8, or 64 pieces. I sew adjacent pieces together, so that would result in 32 1x2 pieces. Then, I would sew two of those units together, yielding 16 2x2 pieces. THen sew two together, so the pieces are now 2x4. Then sew two 2x4 pieces together for a total of four 4x4 pieces. Sew two together then sew your last seam. THis weighs less as I pass it through the machine so less drag until that last piece. If this is clear as mud, PM me for more help (or ignore this--whichever works) Have a good day.
#5
Divide it into quadrants. Then you take the first pair from the top left and sew them together. Without taking them off the machine take the next pair in the second row and sew them together. Keep doing that until you get the first pair sewn together for the top left quadrant. Then open the first pair and sew the third square in each row to the second square. Do that for each row and then open them and sew the fourth square to the third one in each row. Do that for each quadrant and then press the seams in each row in opposite directions and sew the rows together. By not cutting the chain between you'll keep all your pieces in the right orientation.
#6
I have a less than usual method developed. For me, I get better accuracy having only one full seam to sew across the quilt. Your piece is 8x8, or 64 pieces. I sew adjacent pieces together, so that would result in 32 1x2 pieces. Then, I would sew two of those units together, yielding 16 2x2 pieces. THen sew two together, so the pieces are now 2x4. Then sew two 2x4 pieces together for a total of four 4x4 pieces. Sew two together then sew your last seam. THis weighs less as I pass it through the machine so less drag until that last piece. If this is clear as mud, PM me for more help (or ignore this--whichever works) Have a good day.
#8
Power Poster
Join Date: Feb 2009
Location: Northern Michigan
Posts: 12,861
personally i would start in the center and work my way out- meaning i would sew the center 4 together-forming the pinwheel- then frame it with the next round- sewing the 4 flying geese units, 2 with corner squares- attaching one on each side without the corners- then the 2 with the corners- then out to the next *round* until it was complete- doing it section by section. i've made this same square numerous times- and have always worked my way out- for me there is much more room for error trying to line up whole lines/rows when piecing the components brings it all together accurately.
#9
Super Member
Join Date: Nov 2010
Location: Cadillac, MI
Posts: 6,487
I made mine in quarters, then sewed the quarters together. I sewed a row of four, laid it aside, sewed the next row of four and the sewed these two together. I checked their placement on the board as I picked up the next two rows. When a 4 by 4 unit was done, I left it and did the next quarter (quadrant). Then I sewed the quarters to halves and one last seam across the center.
Thread
Thread Starter
Forum
Replies
Last Post
Linda-in-iowa
General Chit-Chat (non-quilting talk)
18
03-20-2011 04:01 PM