Domestic machine on quilt frame?
#1
Super Member
Thread Starter
Join Date: Feb 2014
Location: Davenport, Iowa
Posts: 3,907
Domestic machine on quilt frame?
I have a Janome 6500P that does a million different stitches, and was told I could put it on a LAQ frame that I purchased online from a reputable company. Well, it does fit, but with a 9" throat space it only gives me about 4 or 5 inches of quilting space at a time. On a practice muslin quilt piece it sewed beautifully after getting the stitches the size I needed them...but a quilt top?? I'm banging my head against the wall and ripping out terrible stitches. Has anyone else tried a domestic on a LAQ frame?
#3
You've just run up against the typical problem with a DSM on a frame, and the problem gets worse as you roll the quilt and have less and less space. Lots of people do make this system work though. Like Kitsie, I have seen where some machines throats can be lengthened, but I think that was done with a vintage machine.
#4
Correct me if I'm wrong, but I think the original Handi-Quilter "frame" was a portable version that you used with your DSM. You had rails that you taped to your counter top or table and set your DSM on the trolley (my name for it). In fact this is the system I use, but with a lot of DIY improvements. The rails have been upgraded to metal not plastic, mounted on a permanent table, counter top formica covered, and the aluminum rods now have wooden dowls through them. Yes, with my Brother 1300 on it, my throat space is limited, but I have done a queen size quilt on it. I did one half of the quilt and then removed it from the frame and rotated it to do the other side. I was doing the Baptist Fan pattern. Tricky but doable. Since I'm only quilting for myself and I don't enter my quilts in shows or the fair, it's a cheap solution to owning a LA. I keep my quilting lines simple, a meander or echo stitch, no feathers for me! I find it easier to FMQ by moving my machine vs moving my quilt. Like everything else in quilting, practice, practice, practice.
#5
i used to use the Juki on a frame. yes, the max space at the end is only 4-5". so you have to get creative with the designs in the block. i used to do the bottom 2 corners, then the middle, then the top 2 corners [or the other direction]. it took more time, but definitely worked.
#6
I have a Janome 1600p on a Little Gracie frame. Yes the throat space is limited, but since I have never quilted on a true longarm, I don't know any better☺.
Anyway, it does take some messing with it to get your tension just right with whichever thread your using. I discovered that Glide on the top and Bottomline in the bobbin, doesn't work for me. Stitches just don't want to form. Connecting threads brand of thread works well.
I took my feed dogs out since my machine doesn't drop them.
Just keep trying and you will figure it out. Good luck.
Anyway, it does take some messing with it to get your tension just right with whichever thread your using. I discovered that Glide on the top and Bottomline in the bobbin, doesn't work for me. Stitches just don't want to form. Connecting threads brand of thread works well.
I took my feed dogs out since my machine doesn't drop them.
Just keep trying and you will figure it out. Good luck.
#7
Power Poster
Join Date: Jun 2010
Location: Alabama
Posts: 15,368
I have one mounted on a Gracie frame. It has a 9 1/2" throat and works good for me but you don't have much space. Mine is 6 1/2 to 7" of quilting area.
[ATTACH=CONFIG]579237[/ATTACH]
My machine is a 1914 Singer model 66 that my DH stripped down and repainted with new decals. He put precision ball bearings to help the movement and a bicycle brake handle to control the speed of the machine. I also store fabric underneath my frame. I love it.
[ATTACH=CONFIG]579237[/ATTACH]
My machine is a 1914 Singer model 66 that my DH stripped down and repainted with new decals. He put precision ball bearings to help the movement and a bicycle brake handle to control the speed of the machine. I also store fabric underneath my frame. I love it.
Last edited by twinkie; 08-20-2017 at 04:48 AM.
#8
Super Member
Join Date: Mar 2011
Location: in the sticks of PA
Posts: 2,313
Kitsie, what you are referring to is the Bailey machine it's just a stretched DSM however you still don't have the height once you roll the quilt. I belong to the online group and was so glad to hear all the problems that a lot of them had so I didn't go that route. Make an informed decision before you invest your money.
#10
Super Member
Join Date: May 2011
Location: Pacific NW
Posts: 9,585
I have a Singer 201 that was stretched to 18" by WOW.
Last edited by Peckish; 08-20-2017 at 09:05 AM.
Thread
Thread Starter
Forum
Replies
Last Post
Onebyone
Links and Resources
16
01-24-2016 01:34 PM
quiltorpainthorse
Introduce Yourself
23
01-04-2011 01:32 PM