Hardwood Floors and Longarm Machines
#1
Super Member
Thread Starter
Join Date: Nov 2011
Posts: 1,330
Hardwood Floors and Longarm Machines
For those of you who have hardwood floors in your houses and Longarm Machines, how are you protecting your floors from scratches and dents? I have read that the felt type pads flatten after a short time.
#3
They do as well as the rubber pads. I would make a coupling of layers from rug pads (the waffle kind) and cut them big enough to come up over the legs and secure with rubber bands. I did this on skirted chairs where the legs where hidden and it kept them from moving around on the hardwood floor.
#4
Super Member
Thread Starter
Join Date: Nov 2011
Posts: 1,330
I don't have my frame and machine set up yet, as my hardwood floors are being installed, but I want to protect my floors from dents and scratches from the weight of the frame and machine. We have spent a small fortune for these floors.
#5
Super Member
Join Date: May 2011
Location: Pacific NW
Posts: 9,585
Hmmm okay, well... A good quality frame should not move once it's set up (which is why I asked what you're using). What are you planning to use underneath your furniture? I would use whatever you place under your tables, couches, etc.
#7
Super Member
Join Date: Sep 2010
Location: Myrtle Beach, SC
Posts: 8,145
Right you are, Peckish. Not only that, every time you move the frame it needs to be checked to ensure that it is still squared. That becomes a pain very quickly.
In a similar situation, I think i'd put one of the furniture moving pads under each leg, softer side up, plastic side down. Haven't done it though, so cannot swear that it will prevent impressions in the floor.
In a similar situation, I think i'd put one of the furniture moving pads under each leg, softer side up, plastic side down. Haven't done it though, so cannot swear that it will prevent impressions in the floor.
#8
Member
Join Date: Apr 2013
Location: Rockland County New York
Posts: 58
I have a Q’ni On a Bernina frame in a room with hardwood floors for over 3 years. Due to the limited space I have to move it away from wall when I quilt and I don’t have any scratches or dents from it. I do agree that you have to check it’s lecel, but I just keep a small level in my sewing room and each time I pull it away from the wall I walk the length of the frame with it, no big deal. I think that’s because my sewing room seems to have the only level room in the house.
#9
Junior Member
Join Date: Jan 2012
Location: Butte, Montana
Posts: 185
I just bought a carpet remnant that was narrow (but wide enough for the legs) and put a piece of the padding that is made for hardwood floors under it. You don't want to use a rubber type pad. You could also use a couple of layers of felt under the carpet.
#10
Super Member
Join Date: Aug 2010
Location: Upstate New York
Posts: 1,231
I have hardwood floors and a longarm. The previous posters that said your frame should never move once it's set up are correct. Once you move it, you have to re-level and re-square it. It is very heavy, so it won't move on it's own. My machine alone, without the frame weighs over 80 pounds. I wouldn't want any kind of cushion under the frame, because as it gets compressed, it can make your frame unlevel..I doubt they'd all compress evenly. I have solid wood floors, but if you're asking about something like laminate..it shouldn't be any different. The danger of denting it is almost zero because hardwood won't dent unless it's banged or something is dropped on it. A stationary object won't hurt it. Think of it like a huge piece of furniture..it's just going to sit there.
Thread
Thread Starter
Forum
Replies
Last Post
CindyA
General Chit-Chat (non-quilting talk)
31
05-05-2013 08:57 AM
Learner747
General Chit-Chat (non-quilting talk)
17
07-20-2011 04:56 AM