Barb_MO's Bargello Tutorial -*- Cutting strip sets
#1
![Default](/images/icons/icon1.gif)
Cutting strip sets
Now, that you have sewn your strips into panels/strip sets and ironed with seam going in opposite directions for each strip set you are ready to cut the strips sets into more strips.
Cutting directions: You have your strips sets laying down with the wrong sides facing up. (photo #1)
Take first one off the stack and lay it on the cutting mat and straighten one end (photo#2)
Fold the strips set right sides together, with six fabs on bottom and 5 on top. I like to do it this way so I'm sure my ruler will reach the end of the set.
On the right side, match up the seams in two of three places and pin, (Photo #3). This helps to keep the set from shifting as you move it around and cut your strips.
If the left is still straight you can start to cut the strips according to what size you need. In the case of #1 set, that would 3 1/2". (photo #4) You may have to straighten the left size after a few cuts. With the ends pinned on the right side you can smooth it out, be sure all your seams match on the left and cut a new straight edge. Use lines on rull to line up with seam line to get straight cuts. continue cutting the 3 1/2" pieces until you have the required number. As you cut the strips unfold and stack together.
Use this process until you have cut all the strip sets into needed amount in the required widths and stacked...and you will then have 2,156 little pieces sewn (photo#5). Not once did you have to pick up and sew two little pieces together or sew strips into tubes, cut, then snip out threads to open where you needed a certain color on the top.
Next set of instructions will be to arrange all these strips so they will be sewn in order to make the four sections of your quilt.
Now, that you have sewn your strips into panels/strip sets and ironed with seam going in opposite directions for each strip set you are ready to cut the strips sets into more strips.
Cutting directions: You have your strips sets laying down with the wrong sides facing up. (photo #1)
Take first one off the stack and lay it on the cutting mat and straighten one end (photo#2)
Fold the strips set right sides together, with six fabs on bottom and 5 on top. I like to do it this way so I'm sure my ruler will reach the end of the set.
On the right side, match up the seams in two of three places and pin, (Photo #3). This helps to keep the set from shifting as you move it around and cut your strips.
If the left is still straight you can start to cut the strips according to what size you need. In the case of #1 set, that would 3 1/2". (photo #4) You may have to straighten the left size after a few cuts. With the ends pinned on the right side you can smooth it out, be sure all your seams match on the left and cut a new straight edge. Use lines on rull to line up with seam line to get straight cuts. continue cutting the 3 1/2" pieces until you have the required number. As you cut the strips unfold and stack together.
Use this process until you have cut all the strip sets into needed amount in the required widths and stacked...and you will then have 2,156 little pieces sewn (photo#5). Not once did you have to pick up and sew two little pieces together or sew strips into tubes, cut, then snip out threads to open where you needed a certain color on the top.
Next set of instructions will be to arrange all these strips so they will be sewn in order to make the four sections of your quilt.
#1 Strips Sets Ironed , Stacked, Ready to Cut
[ATTACH=CONFIG]66439[/ATTACH]
#2 Straighten one end of strip set
[ATTACH=CONFIG]66450[/ATTACH]
#3 strip set folded and pinned on left
[ATTACH=CONFIG]66451[/ATTACH]
#4 One strip cut from first strip set.
[ATTACH=CONFIG]66452[/ATTACH]
#5 All sets have bee cut & stacked. There are 2,156 pieces stacked here
[ATTACH=CONFIG]66481[/ATTACH]
#2
![Default](/images/icons/icon1.gif)
For discussion on fabric choices and arrangement, photos of bargellos I've made, cutting and sewing strips, pressing, etc. read through "Bargello Tute" at http://www.quiltingboard.com/t-43226-1.htm
#3
![Default](/images/icons/icon1.gif)
Barb, when I clicked on"Bargello Tute" at http://www.quiltingboard.com/t-43226-1.htm for the discussion on fabric choices and arrangement, photos of bargellos you have made, cutting and sewing strips, pressing, etc. it takes me back to "cutting strip sets". Thanks Bevster
#4
#6
![Default](/images/icons/icon1.gif)
Originally Posted by Vicki Z
Barb, I guess that I missed it ......how wide is each strip in each panel?
#9
![Default](/images/icons/icon1.gif)
i had the panels done last week before my eye surgery..so was just waiting on cutting those.. so when you posted that part i cut them... cutting is the fast part..sewing all those stips..that is a different story !!!
#10
![Default](/images/icons/icon1.gif)
I've been working of some other quilting projects in between doing this and keeping my house in order, but have all the pictures ready, so will get the sewing message up later today/evening.....That when I get to show off my one finished section :-)
Thread
Thread Starter
Forum
Replies
Last Post
Barb_MO
Main
7
03-01-2011 07:58 PM