Twisted Log Cabin
#52
This is great, and after all is said and done, I think you made a very nice tutorial. I have this one saved as a webpage, and some nice fabric to make it with.
I appreciate techniques that don't require a lot of equipment.
.
I appreciate techniques that don't require a lot of equipment.
.
#57
Junior Member
Join Date: Jul 2010
Location: Murphy TX
Posts: 129
Wow...pulled this up and knew I had to make this. Luckily I just finished several things so can start on this without a guilty conscience. Thanks so much for sharing and the tut!
Susan
Catsbelle
Susan
Catsbelle
Last edited by QuiltnNan; 04-18-2019 at 03:59 AM. Reason: shouting/all caps
#58
Thank you for your time and trouble posting this tute. I have found it very informative and the mistakes are good because I know what to watch out for. Most times we read what can happen but it does not actually sink in until it does happen, not that I am wishing mistakes to happen. Not at all just that I learn better with visual examples. Thank you. It is a great tutorial. :D:
#59
Originally Posted by fryguymoore
I hope you can see from the picture that the piece you just cut needs to be sewn on before you continue :)
This step is the secret to this process and is how this can be done without paper piecing. If you don’t get it here, please keep reading, it is easier to see as the piece gets bigger.
The red dots represent the corners where the pink fabric meets with the black. Match these points on the FABRIC with the white lines on the RULER. You will have to move the ruler around a bit until BOTH dots are on the line. As shown, leave ¼ inch above the left hand dot [this is your seam allowance], and 1 ¼ inch above the right hand dot. Once you are all lined up, you can cut.
THE ONLY ERROR YOU CAN MAKE THAT IS UPSETTING COULD HAPPEN ON THIS STEP. To avoid this possible error, make sure you have ¼ above the right hand dot, this is your seam allowance and if you cut it off you will not be happy!
This step is the secret to this process and is how this can be done without paper piecing. If you don’t get it here, please keep reading, it is easier to see as the piece gets bigger.
The red dots represent the corners where the pink fabric meets with the black. Match these points on the FABRIC with the white lines on the RULER. You will have to move the ruler around a bit until BOTH dots are on the line. As shown, leave ¼ inch above the left hand dot [this is your seam allowance], and 1 ¼ inch above the right hand dot. Once you are all lined up, you can cut.
THE ONLY ERROR YOU CAN MAKE THAT IS UPSETTING COULD HAPPEN ON THIS STEP. To avoid this possible error, make sure you have ¼ above the right hand dot, this is your seam allowance and if you cut it off you will not be happy!
Regarding this matching u said on both fabric with ruler
My question is how much wide is between two white lines
And please be bation with me i try to follow your lesson but may be many days not only today
Thread
Thread Starter
Forum
Replies
Last Post