I need an air-threading serger!
#1
Power Poster
Thread Starter
Join Date: Dec 2008
Location: Western Wisconsin
Posts: 12,930
I need an air-threading serger!
My eyes are getting worse with age, as is my fine coordination. I have a 20-year-old Bernette serger and I just don't want to deal with the threading any more.
Whick one should I get? It has to have air threading, I think. There are (I hope) grandchildren in our future, so I want a machine that is good for making baby clothes. Unless switching to cover stitch is really easy, I'm thinking I would be best off buying a separate cover stitch machine later.
My current needs are sporadic. I just want something that I can set up and use without spending an hour bending down trying to thread loopers.
Any recommendations?
Whick one should I get? It has to have air threading, I think. There are (I hope) grandchildren in our future, so I want a machine that is good for making baby clothes. Unless switching to cover stitch is really easy, I'm thinking I would be best off buying a separate cover stitch machine later.
My current needs are sporadic. I just want something that I can set up and use without spending an hour bending down trying to thread loopers.
Any recommendations?
#2
Member
Join Date: Jan 2015
Location: Northwest Arkansas
Posts: 65
Go on the Babylock web site and check out the Babylock sergers then you may want to find a dealer near you to go in and see a demonstration. You could also try them out. I have an older Ovation that coverts to a cover stitch that I like. However, if I had it to do over again, I would get one that did not do the convert to cover stitch thing and then get a separate cover stitch machine. Then you can leave the cover stitch set up all the time.
#3
Super Member
Join Date: May 2017
Location: Sunny Florida
Posts: 4,431
Agree with looking at the Babylock ones. There are some mid-range priced ones. I have the Ovation also and wanted all the features. In reality, the mid range models would have been fine.
The threading system is not hard. If you have a local dealer check with them first. They may have trade-ins available. There is a new model above the Ovation with a needle threader.
The threading system is not hard. If you have a local dealer check with them first. They may have trade-ins available. There is a new model above the Ovation with a needle threader.
#4
Senior Member
Join Date: Dec 2010
Location: Newnan, Georgia
Posts: 630
My serger is also about 20 yrs. old. I clip the old thread near the spool and the tie the new thread on to the old with a good knot. Then I watch the knots as I run the thread until they get to the needle. I only cut the threads that go through the needle so I can thread them. Then sew some more until all the new thread is in place to use.
#6
Super Member
Join Date: Jul 2013
Location: Houston, TX
Posts: 9,735
My serger is also about 20 yrs. old. I clip the old thread near the spool and the tie the new thread on to the old with a good knot. Then I watch the knots as I run the thread until they get to the needle. I only cut the threads that go through the needle so I can thread them. Then sew some more until all the new thread is in place to use.
#7
Member
Join Date: Aug 2011
Posts: 49
I'm a "Juki Junkie" - one of my machines I'm most impressed with is my MO2000QVP air threading serger. There is nothing about this machine that isn't awesome! I fully expected to be in love with the air thread function - the real surprise however was the needle threaders! Hard to say which I like most .... Best part - I purchased the serger at Paducah a couple years ago when the machine was being introduced at the show price special! Bazinga! This machine is a very definite contender of you're in the market for an air threader.
#8
Super Member
Join Date: Sep 2011
Location: Carroll, Iowa
Posts: 3,487
yes, I can relate to trying to thread a serger or even a sewing machine these days. I have Babylock's Evolve and am very happy with it. I don't use the serger much so can't see upgrading everytime they get a new one. Its the 1st time I've been able to do the cover stitch. My old Elna serger I never could get it threaded correctly so kept it for 3-thread stitching. Love my Babylock though.
#9
I have the Babylock Imagine. Best purchase I ever made (not counting my Miata)!!! It doesn't do a cover stitch, but truthfully, I haven't missed not having it. I do a lot of costuming working with upholstery fabric, velvet, silky type material and my Imagine has handled it all. My biggest complaint is that it wants to slide all over the table. I ended up cutting a piece of foam type shelf liner to put under it and problem solved.
Thread
Thread Starter
Forum
Replies
Last Post