1 1/2" square frustration
#1
Hi everyone. I know I'm famous for doing things that are WAY beyond my skills, but I thought this would be easy.
I have 1 1/2" strips, sewing 6 of them together, then cutting them all 1 1/2", then sewing those strips so the block is 6 1/2 x 6 1/2. All of my seams are going the right way, but I just can't seem to get them all butted correctly. Could be because I've been sewing most of the day, so my visions probably a bit crazy....but is there a secret to these? I thought small would be good, maybe not so much.
Thanks!
I have 1 1/2" strips, sewing 6 of them together, then cutting them all 1 1/2", then sewing those strips so the block is 6 1/2 x 6 1/2. All of my seams are going the right way, but I just can't seem to get them all butted correctly. Could be because I've been sewing most of the day, so my visions probably a bit crazy....but is there a secret to these? I thought small would be good, maybe not so much.
Thanks!
#5
Originally Posted by watterstide
after you pin the seams together..and one is a little longer than the other..the longer one goes on the bottom..does that make sense?.
#6
It's probably just because the fabric has stretched a little. If it's just a tiny bit, I wouldn't worry about it too much, most people's joints fudge once in awhile. Just tug it a bit and pin.
BTW, small is not easier. I did some Bear Paw blocks that the finished center sq was 1/2" and the finished "toes" were 1" HSTs. They were hateful little things and if it had been something for myself I'd have tossed it.
BTW, small is not easier. I did some Bear Paw blocks that the finished center sq was 1/2" and the finished "toes" were 1" HSTs. They were hateful little things and if it had been something for myself I'd have tossed it.
#7
I'm already thinking of changing the blocks...instead of 36 in each square, maybe I'll make them bigger, might be easier...well, except for NOT having bigger fabric pieces that is! Thanks for all of your words of wisdom!
#8
Power Poster
Join Date: Dec 2008
Location: Western Wisconsin
Posts: 12,930
I don't think the smallness matters as much as the number of seams you have to match. That's what makes it difficult. Of course, the smaller the pieces, the more seams you usually have to match and the less space you have for easing.
Someone on this forum posted about using Elmer's glue instead of pins on seam joins. I tried this the other day and found it works better than pins for me. It does require some time at the ironing board. What I did was place a pin straight down through both pieces into the ironing board cover, lifted the seam allowance next to the pin, put just a tiny dot of white glue in there, then ironed the seam allowance closed. It held really well, and my joins were as good as it gets with me.
I did find the glue migrated a little past the seam so, when ironing the pieces open, I first had to tug a bit to unglue the front. I have since gotten out one of those little glue bottles with the tiny tip and plan to use that for smaller glue dots. Also plan to place a piece of damp sponge in the bottom of a jar so I can leave the little glue bottle upside down when not in use and still have the tip stay clear.
Someone on this forum posted about using Elmer's glue instead of pins on seam joins. I tried this the other day and found it works better than pins for me. It does require some time at the ironing board. What I did was place a pin straight down through both pieces into the ironing board cover, lifted the seam allowance next to the pin, put just a tiny dot of white glue in there, then ironed the seam allowance closed. It held really well, and my joins were as good as it gets with me.
I did find the glue migrated a little past the seam so, when ironing the pieces open, I first had to tug a bit to unglue the front. I have since gotten out one of those little glue bottles with the tiny tip and plan to use that for smaller glue dots. Also plan to place a piece of damp sponge in the bottom of a jar so I can leave the little glue bottle upside down when not in use and still have the tip stay clear.
#9
Originally Posted by jcarilyn
Hi everyone. I know I'm famous for doing things that are WAY beyond my skills, but I thought this would be easy.
I have 1 1/2" strips, sewing 6 of them together, then cutting them all 1 1/2", then sewing those strips so the block is 6 1/2 x 6 1/2. All of my seams are going the right way, but I just can't seem to get them all butted correctly. Could be because I've been sewing most of the day, so my visions probably a bit crazy....but is there a secret to these? I thought small would be good, maybe not so much.
Thanks!
I have 1 1/2" strips, sewing 6 of them together, then cutting them all 1 1/2", then sewing those strips so the block is 6 1/2 x 6 1/2. All of my seams are going the right way, but I just can't seem to get them all butted correctly. Could be because I've been sewing most of the day, so my visions probably a bit crazy....but is there a secret to these? I thought small would be good, maybe not so much.
Thanks!
Thread
Thread Starter
Forum
Replies
Last Post
nativetexan
Main
28
10-19-2013 08:37 PM