2010 Sentimental Journey BOM - need help
#1
Member
Thread Starter
Join Date: Apr 2013
Posts: 7
2010 Sentimental Journey BOM - need help
I have all 12 blocks completed of this BOM, however the remaining instructions for the borders (size etc) & corners are missing and have never been added. I'm a novice quilter, I do know other quilters who have finished this project, I'm waiting patiently for their instructions. However if anyone on here has completed this project could you kindly forward the information I require to finish this project off. I'd like to have the top completed by the end of the week, if possible.
thank you so much
Dawn
thank you so much
Dawn
#2
Super Member
Join Date: Apr 2007
Location: Alturas, CA
Posts: 9,393
I haven't completed the blocks, actually haven't even started them but I have all the blocks in my to do file, and I went to her web site and from what it looks like, she never gave the instructions for the border, but looking at the pictures of the completed quilt, it should be fairly easy to "wing" it so you can complete your quilt.
#4
Junior Member
Join Date: Jun 2010
Location: Arlington, TX
Posts: 231
I have the block directions too (haven't even started!) but no borders, etc. I did try to contact the designer but got no response. I am glad to hear at least I didn't just miss the directions but instead they were never posted. And I agree with pocoellie, I think I can figure out what I need. It is a pretty quilt.
#5
Super Member
Join Date: Oct 2010
Location: howell, Mi
Posts: 2,345
I also have the block patterns, but no finishing directions. I think it won't be too hard the make the borders without the patterns. At the time I sent an eMail with no response, and spent a couple of years checking back with no pattern ever posted. It looks like the designer (forgot her name) just abandoned the site. It certainly is frustrating, but not impossible. Good luck finishing your quilt. This experience has taught me to get all the directions before starting the quilt.
Sue
Sue
#7
Member
Thread Starter
Join Date: Apr 2013
Posts: 7
hey folks did some searching on this site and through some friends this is what I have found.
Counted up the sashings that go between the blocks, I got 31 strips @ 2.5" wide with 1/4" inseam, length will depend on the size of your block once you've squared it up.
You will need to cut 20 of colour B @ 2.5" square to put at the end of the sashings.
I'm guessing these are the blocks for the four corners of the borders.
Corner pieced blocks for border (6 1/2" squares)
4 brown and cream 6.5" blocks:
4 cream 2.5" squares
16 cream triangles made from one diagonal cut of eight 2 7/8" squares
16 brown triangles made from one diagonal cut of eight 2 7/8" squares
4 brown check and cream 6.5" blocks:
4 cream 2.5" squares
16 cream triangles made from one diagonal cut of eight 2 7/8" squares
16 brown check triangles made from one diagonal cut of eight 2 7/8" squares
copied these 6.5" blocks from a chat I found on this blog site. Where the finished blocks are to be 6.5" then the borders should be 7" wide to allow for the 1/4" seams.
I'm really hoping this will work out - best of luck everyone. I'm going to start cutting these measurements out today
Counted up the sashings that go between the blocks, I got 31 strips @ 2.5" wide with 1/4" inseam, length will depend on the size of your block once you've squared it up.
You will need to cut 20 of colour B @ 2.5" square to put at the end of the sashings.
I'm guessing these are the blocks for the four corners of the borders.
Corner pieced blocks for border (6 1/2" squares)
4 brown and cream 6.5" blocks:
4 cream 2.5" squares
16 cream triangles made from one diagonal cut of eight 2 7/8" squares
16 brown triangles made from one diagonal cut of eight 2 7/8" squares
4 brown check and cream 6.5" blocks:
4 cream 2.5" squares
16 cream triangles made from one diagonal cut of eight 2 7/8" squares
16 brown check triangles made from one diagonal cut of eight 2 7/8" squares
copied these 6.5" blocks from a chat I found on this blog site. Where the finished blocks are to be 6.5" then the borders should be 7" wide to allow for the 1/4" seams.
I'm really hoping this will work out - best of luck everyone. I'm going to start cutting these measurements out today
Thread
Thread Starter
Forum
Replies
Last Post