Accurate Cutting? Need some help
#1
Junior Member
Thread Starter
Join Date: Apr 2010
Posts: 133
Accurate Cutting? Need some help
Hi All-
I am about ready to SCREAM! Now, mind you I am an OCD/ADHD type of person who LOVES perfection and quilting/cutting fabric has become quite a humbling experience because there is SO much human error involved..it drives me nuts! HA!
ANYWAYS, I am wondering how to improve my cutting skills to make everything else line up correctly. Trust me, I have improved SO MUCH from a year ago. Some factors I am wondering about..does the CUTTING TABLE matter? I currently cut on one of those plastic fold up tables, and yes, the table is very sturdy, but when you press on the top, it does have some "play" to it..would a wooden table make a difference at all? Secondly, I ALWAYS have a sharp blade, so that isn't an issue, and I really try to triple check and square up EVERYTHING before making the cuts.
Advice or tips would be GREAT! Thanks, JC
I am about ready to SCREAM! Now, mind you I am an OCD/ADHD type of person who LOVES perfection and quilting/cutting fabric has become quite a humbling experience because there is SO much human error involved..it drives me nuts! HA!
ANYWAYS, I am wondering how to improve my cutting skills to make everything else line up correctly. Trust me, I have improved SO MUCH from a year ago. Some factors I am wondering about..does the CUTTING TABLE matter? I currently cut on one of those plastic fold up tables, and yes, the table is very sturdy, but when you press on the top, it does have some "play" to it..would a wooden table make a difference at all? Secondly, I ALWAYS have a sharp blade, so that isn't an issue, and I really try to triple check and square up EVERYTHING before making the cuts.
Advice or tips would be GREAT! Thanks, JC
#2
Super Member
Join Date: Jan 2011
Location: 25 yrs in TN; now back home in MI
Posts: 1,871
The bounce can affect your cutting.
Check to see that your mat is clear from embedded lint and that there aren't any ridges or nicks in it.
Is the height of your table comfortable for you? I put risers under mine.
I find the harder I try the more mistakes I make. Sometimes I just have to walk away for a few minutes and sing a little ditty.
Check to see that your mat is clear from embedded lint and that there aren't any ridges or nicks in it.
Is the height of your table comfortable for you? I put risers under mine.
I find the harder I try the more mistakes I make. Sometimes I just have to walk away for a few minutes and sing a little ditty.
#7
Power Poster
Join Date: Mar 2009
Posts: 15,639
When you hold down the ruler, do you hold it in the middle? I used to hold mine in the middle and it would shift on me just a tad. Now I hold down the lower third, cut up to where I still have good control, then walk my fingers up the ruler, hold it down and cut some more. Sometimes I only need 2 changes, sometimes 3.
I also stopped layering too many layers of fabric. Cutting fewer layers gives me better results.
Sometimes - depending on the pattern, I may cut a piece oversize and trim it down precisely.
I also stopped layering too many layers of fabric. Cutting fewer layers gives me better results.
Sometimes - depending on the pattern, I may cut a piece oversize and trim it down precisely.
#8
Super Member
Join Date: Apr 2010
Location: Illinois
Posts: 9,312
I thought I was a pretty good "cutter" but still had some ... imperfections that just made me NUTS! till I started to starch my fabrics... What a difference it makes in everything ! Because I am so NUTS about it ... I use an immersion method .... I mix ( two parts water to one part starch) from a starch concenrate (Stayflo .. blue bottle ..Walmart) them soak the whole fabric in the mix ( I use a 1 gallon plastic bucket) .... really saturating the fabric then hang dry on a drying rack.. Then iron then cut... Try it ... I think you will like the results. It extra steps but when I don't do it ... I regret it. When only a few inches of a fabric is needed I use a sponge type paint brush and just paint the few inches of the end of the fabric . Then cut the required strip.
Last edited by Lori S; 02-22-2012 at 04:55 PM.
#9
Power Poster
Join Date: Feb 2009
Location: Northern Michigan
Posts: 12,861
a good cutting table- made for that- that is situated at the correct height for you is a must-
starching your fabrics also helps-
the film that is added to rulers (or dots) to keep them from slipping help also.
patience-
not trying to cut too many layers at a time-
practice
all make a difference.
starching your fabrics also helps-
the film that is added to rulers (or dots) to keep them from slipping help also.
patience-
not trying to cut too many layers at a time-
practice
all make a difference.
#10
Super Member
Join Date: Apr 2011
Location: Bosque County, Texas
Posts: 2,709
If your rulers don't have a non-slip surface on them, glue a few thin strips of fine sandpaper to the side that goes against your fabric. Always put your rulers straight up and down on your fabric, never slide them across the fabric. The suction cup handles made for seniors to help them in and out of the bath make great holders for your rulers. They are sold in the notions sections, but cost less when sold as aids for seniors on Ebay.
Last edited by TanyaL; 02-22-2012 at 05:36 PM.
Thread
Thread Starter
Forum
Replies
Last Post