Applique Stitching Question
#1
After all these years, I have decided that I like the look of the blanket stitch and would like to make an applique quilt using this technique. I've gone through all my books and cannot find the answer. I have a sewing machine that has the blanket stitch. But my questions refer to both machine and hand blanket stitching.
1. When doing the blanket stitch (by hand or machine), do you turn under the 1/4 inch seam or not?
2. If you do not turn under the seam allowance, when you wash the quilt does the edges of the exposed seam ravel?
3. Why do I have to use fusible webbing? Once the quilt is washed, doesn't the fusible webbing release the fabric like interfacing does thereby the edges are free to ravel?
4. If I don't use fusible webbing, do I have to turn under the 1/4 inch seam.
1. When doing the blanket stitch (by hand or machine), do you turn under the 1/4 inch seam or not?
2. If you do not turn under the seam allowance, when you wash the quilt does the edges of the exposed seam ravel?
3. Why do I have to use fusible webbing? Once the quilt is washed, doesn't the fusible webbing release the fabric like interfacing does thereby the edges are free to ravel?
4. If I don't use fusible webbing, do I have to turn under the 1/4 inch seam.
#2
I usually do a blanket on my machine. The fusible web will keep it from unraveling. 2 sided paper fusible. Cut your pattern out after you've put on the web. That way you edges will be clean and even with web.
If you don't use fusible you do have to turn it under, or it will unravel
I hope this helps?? :?: :)
If you don't use fusible you do have to turn it under, or it will unravel
I hope this helps?? :?: :)
#3
Power Poster
Join Date: Jul 2008
Location: Northern Indiana
Posts: 20,306
Oh Oh.. Now I have another question... If my web doesn't go to the edge of the applique, does that mean it will unravel up to the point that it does have the wunder under ? Hoep you can understand what I mean.. Thanks
Sharon
Sharon
#4
Yes, your web has to be larger than your cut out pattern. It needs to pass the edges.
I usually trace my pattern on the paper of the fusible..I cut it 1/2" bigger than the pattern & then iron it on the wrong side of the fabric. Then cut it out again on the line & put it on whatever I'm working on. I hope this helps & I'm explaining it right.
I usually trace my pattern on the paper of the fusible..I cut it 1/2" bigger than the pattern & then iron it on the wrong side of the fabric. Then cut it out again on the line & put it on whatever I'm working on. I hope this helps & I'm explaining it right.
#5
Originally Posted by Justquilting
If you don't use fusible you do have to turn it under, or it will unravel
#6
I just use the blanket stitch. I sew slowly to turn it under as I'm going. But I do Pin it so it stays in place. Or I use spray adhesive so it doesn't move. Or Fabric glue.
If I blind stitch I don't blanket stitch unless I want it for deco.
What are you working on?
If I blind stitch I don't blanket stitch unless I want it for deco.
What are you working on?
#7
Thank you. You have answered all my questions. I wanted to make the 1930's looking quilt in Darcy Ashton's Bunnies & More Applique Book (http://www.threadandmore.com/scripts/prodView.asp?idproduct=6250)[url].
Thread
Thread Starter
Forum
Replies
Last Post
IzzysGrammie
Pictures
64
11-13-2012 09:34 PM