Bad thread?
#1
Senior Member
Thread Starter
Join Date: Jun 2012
Location: Chapel Hill NC
Posts: 322
Bad thread?
Is it possible to get a spool of thread that is just bad? I use C&C ....i know, I know..but ..all my machines love it. But I was piecing on my Kenmore yesterday with a new C&C spool and the thread just kept breaking. I tried everything...rethread, bobbin, new needle, etc...no luck. I'd stitch for 10 or 12 inches and it would break. Today it was doing the same thing. I finally pulled the spool off and put another spool of C&C on and its just humming along. Can you get a crummy spool? That just seems so strange to me, but that seems to be the case here
#3
Super Member
Join Date: Jun 2011
Location: Michigan. . .FINALLY!!!!
Posts: 6,726
First off, there is NO SHAME in using C & C thread. It is all I use for piecing and sometimes FMQ. My great aunt who was my quilting inspiration only used C & C and I am sure that she made more than 1,000 quilts in her 93 years. My mother used it when she sewed clothes for me, my 2 sisters and 3 nieces.
Secondly, yes, you could have gotten a bad spool of thread. Often it is the result of how the thread has been stored before hitting the sales floor. I would take the spool back to where you purchased it and ask for a replacement or a refund.
Secondly, yes, you could have gotten a bad spool of thread. Often it is the result of how the thread has been stored before hitting the sales floor. I would take the spool back to where you purchased it and ask for a replacement or a refund.
#5
Super Member
Join Date: Apr 2010
Location: Illinois
Posts: 9,312
I use C&C thread , and lots of other brands . Is it an older thread? ... thread does loose its strenght over time.. do a break test against the spool you are not having trouble. Take about 12 inches of each and tug on each .. which breaks with the least stress?
It is always possible you got a bad spool with bad thread or a literally a bad spool , one with a burr on the edge so as it unwraps off its getting frayed as it rubs on the edge of the spool.
It is always possible you got a bad spool with bad thread or a literally a bad spool , one with a burr on the edge so as it unwraps off its getting frayed as it rubs on the edge of the spool.
#7
If you can't return it, and yes I have had bad thread in high dollar thread so try putting it in the freezer. Sometimes it dries out and needs a shot. I've used C&C and have not had problems. I've used King Tut and had nothing but problems. Had a bad Star that thank goodness I could return. If you feel your machines like it, use it. It's all good
#8
Super Member
Join Date: Dec 2010
Location: Chula Vista CA
Posts: 7,403
OH MY YES! My sister had given me a set of the filled white thread bobbins. She thought they were the wrong size for her machine and my old singer didn't have any trouble with them except the thread kept breaking. Drove me crazy so after a while I took it out and the thread was so easy to break you can't even use it for basting. You know the three strikes and your out - well, after finding all the bobbins had the same issue they became trash. I told my sister to not buy them again, and she said she thought it was her machine and that it made her feel better to find out it was just the thread.
#9
Power Poster
Join Date: Feb 2009
Location: Northern Michigan
Posts: 12,861
even when you (just bought) a spool of thread- it can be 'OLD' stores don't always rotate their stock- what is new to you may have sat in a back room for years.
i have bought $15 specialty threads from shows only to get it home & find it to be (bad thread) if you can take a length of the thread between your 2 hands-give it a tug and it breaks---it's old, or has been stored improperly- is not any good for stitching...doesn't matter if it's C&C, YLI, Mettler...happens to them all- brand has nothing to do with it.
i've learned over the years- when i open a new spool of thread the first thing i do is a 'tug-test'- if it breaks i don't bother threading my machine with it- i already know it's going to cause problems- i mark it & use it for basting- or some other purpose that isn't going to matter- saves me alot of frustration.
i have bought $15 specialty threads from shows only to get it home & find it to be (bad thread) if you can take a length of the thread between your 2 hands-give it a tug and it breaks---it's old, or has been stored improperly- is not any good for stitching...doesn't matter if it's C&C, YLI, Mettler...happens to them all- brand has nothing to do with it.
i've learned over the years- when i open a new spool of thread the first thing i do is a 'tug-test'- if it breaks i don't bother threading my machine with it- i already know it's going to cause problems- i mark it & use it for basting- or some other purpose that isn't going to matter- saves me alot of frustration.
Thread
Thread Starter
Forum
Replies
Last Post
QuiltnNan
General Chit-Chat (non-quilting talk)
5
11-22-2011 05:01 AM
moonwork42029
General Chit-Chat (non-quilting talk)
35
02-22-2011 01:59 AM
Chasing Hawk
General Chit-Chat (non-quilting talk)
72
01-13-2011 03:31 PM