Beginner machine?
#1
Beginner machine?
As of right now, I have no sewing machine at all. I do EVERYTHING by hand, and actually like doing it that way. BUT I know once I get into quilting, I will get to certain points where I will want a machine (like the actual quiliting part!).
I don't want anything too fancy or expensive; basically something cheap(ish) that will get the job done if I don't ask too much! Is this a 'decent' machine to start with? http://www.walmart.com/ip/Singer-Con...chine/17167244
Thanks!
I don't want anything too fancy or expensive; basically something cheap(ish) that will get the job done if I don't ask too much! Is this a 'decent' machine to start with? http://www.walmart.com/ip/Singer-Con...chine/17167244
Thanks!
#2
Member
Join Date: Nov 2011
Location: Crystal River, Florida
Posts: 37
I have a friend who bought a Brother sewing machine at WalMart and likes it for a back-up machine. Don't know about the Singer. You might want to consider the size of the throat area if you will be quilting on it. I have done a number of Queen size quilts on a machine that has an 8 inch throat and would not want to work with one smaller than that. Suggest you look on Craigslist or something similar for a good used machine. I use Bernina and Baby Lock, have friends who have Janome and are very happy. Shop and try out before you buy.
#4
Super Member
Join Date: Apr 2007
Location: Alturas, CA
Posts: 9,393
Personally I wouldn't buy any new Singer machine, especially a low end one. I would recommend finding a dealer and possibly getting a higher end machine that's been traded in, plus they know what they sell unlike machines sold at a big box store. I would check into a Janome or a Brother, they have a fairly good reputation.
#6
The other two machines I was looking at were Brothers. Someone mentioned an issue with throat size, so I'm not sure about that, but this is them:
http://www.walmart.com/ip/Brother-XL...achine/6005475
http://www.walmart.com/ip/Brother-70...ebate/15029529
http://www.walmart.com/ip/Brother-XL...achine/6005475
http://www.walmart.com/ip/Brother-70...ebate/15029529
#7
Super Member
Join Date: Dec 2010
Location: Norfolk, VA
Posts: 5,397
I also have a Kenmore by Janome that I got at Sears and it does a great job. It's not picky on thread and I've never had to adjust the tension either. I now have a top of line one but this one stays set up in my room and used too.
#8
Junior Member
Join Date: Oct 2012
Location: Texas
Posts: 121
The throat size is the area from the pressure foot (needle) to the right side of the machine. Just remember if your are gonna be quilting you will need room to stuff a huge quilt through while you are quilting.
#9
I have a Janome and recently bought a Pfaff. However, the Singer you mention won the overall 'Best Buy' award on the UK's No.1 consumer magazine when they did the Best Sewing Machine test.
#10
Power Poster
Join Date: Dec 2008
Location: Western Wisconsin
Posts: 12,930
Check reviews on Amazon before making a decision. Many of the reviews provide valuable information about the reliability of a machine, tension sensitivity, etc. You can also look up reviews on http://www.patternreview.com
I looked at the Brother links you provided. They both look as if they have unusually small harp (throat) sizes, which would make it difficult to fit a quilt under.
I'm not sure, but both machines look as if they have all built-in stitches. You really want the ability to change stitch width and stitch length on all stitches.
These machines would probably be okay for piecing, but maybe not so good for machine quilting or for machine applique (because you want to be able to modify the stitch length/width).
I went on Amazon, did a search on Brother sewing machines, selected the department of "sewing machines", specified between $100 and $200, then ordered the results by average customer review (machine with highest rating is listed first). This is the Brother I came up with:
http://www.amazon.com/Brother-Afford...dp/B000JQM1DE/
I believe I have seen others on the QB mention that they are very happy with this model. It does look as if it has a small harp size, however, and I'm not sure if it has adjustable stitch width and stitch length. Looks as if it has 3 needle positions, which is a nice feature to have.
You may want to check if a machine has the needle-down option. Love that on my machine!
I looked at the Brother links you provided. They both look as if they have unusually small harp (throat) sizes, which would make it difficult to fit a quilt under.
I'm not sure, but both machines look as if they have all built-in stitches. You really want the ability to change stitch width and stitch length on all stitches.
These machines would probably be okay for piecing, but maybe not so good for machine quilting or for machine applique (because you want to be able to modify the stitch length/width).
I went on Amazon, did a search on Brother sewing machines, selected the department of "sewing machines", specified between $100 and $200, then ordered the results by average customer review (machine with highest rating is listed first). This is the Brother I came up with:
http://www.amazon.com/Brother-Afford...dp/B000JQM1DE/
I believe I have seen others on the QB mention that they are very happy with this model. It does look as if it has a small harp size, however, and I'm not sure if it has adjustable stitch width and stitch length. Looks as if it has 3 needle positions, which is a nice feature to have.
You may want to check if a machine has the needle-down option. Love that on my machine!
Last edited by Prism99; 11-05-2012 at 02:10 PM. Reason: Sorry. Posted wrong link initially!
Thread
Thread Starter
Forum
Replies
Last Post
MerryCrafty
Main
15
07-21-2009 06:54 PM