Beginning FMQ - from a beginner!
#41
Senior Member
Join Date: Feb 2012
Location: Colorado Springs, CO
Posts: 381
Great thread with a lot of great advice! I have only started practicing FMQ, and it's going to take a lot more practice before I attempt to do it on this quilt. I am going to SITD on most of it; but wanted to FMQ the borders and sashing. I will come back and reread this thread often (cuz I forget a few things these days). Thank you all for posting such great advice!!!!
#42
Senior Member
Join Date: Mar 2012
Location: Harrisburg, OR
Posts: 443
I just turned my tension all the way up to 8 (I usually do 3.5) and the difference was A.MA.ZING. No more eyelashes on the back. I need drop my machine into a table next.mor rewire my 15-91 to try since its in a cabinet already.
#45
I am only 5'2" also and I use an office chair at it's lowest, and sit at a home made table that is 26.5" high. This is comfortable for me. When I have a large quilting project I move my machine to a larger table that is 2.5" higher and that difference is noticed, but I adjust ok. No way can I use a drafting chair. My feet dangle. My quilting frame is too high for my comfort so I just stand. I have tried using a stool and drafting chair, but end up pushing them asside and just stand. My feet need to be on the floor or they go numb.
Last edited by DebbyT; 05-22-2012 at 05:54 AM.
#46
Super Member
Join Date: Oct 2010
Location: Maple City, MI
Posts: 2,135
I have been working on fmq for a while now. I don't have any real advice, other than when I go to do a project, I have begun doing a practice sandwich of the fabric and thread I plan to use. I don't know why--but if I don't, tension issues seem to erupt!
#47
My first tip is to try quilting standing up. I find that I can quilt much longer this way without my shoulders and back stiffening up. I place my sewing machine on my cutting table and find that to be a very good height.
Second tip is to make an inexpensive styrofoam "surround" for the machine on the cutting table. There are some Youtube videos on how to do this:
http://www.youtube.com/watch?v=g14govA4pIM
http://www.youtube.com/watch?v=yAS25v3ZTk0
Third tip is to arrange a table or ironing board to the left of your quilting area to hold part of the quilt. This really helps spread the weight of the quilt.
Second tip is to make an inexpensive styrofoam "surround" for the machine on the cutting table. There are some Youtube videos on how to do this:
http://www.youtube.com/watch?v=g14govA4pIM
http://www.youtube.com/watch?v=yAS25v3ZTk0
Third tip is to arrange a table or ironing board to the left of your quilting area to hold part of the quilt. This really helps spread the weight of the quilt.
I am one that tends to jump right into a project without thinking about it. I will practice a little bit on a small sample to get the tension right, but then it is onto the quilt it self. I also started with a meander and am now just starting other designs. I find it very relaxing and tend to zone out the kids when they are around. Which can be good and bad at the same time
Have fun, take it one step at a time, enjoy the process and don't sweat the little things.
#48
Ok I've all heard about bring the thread up when you begn quilting, but never about ending your stitches. What do you do with the thread then? Bring them both to the front or just cut them off, one on the bottom and one on the top? Please advise as to the proper way.
#49
I was taught to have appx 2-3" of thread at the beginning and end and pull the bobbin thread through, tie a knot close to the fabric, then take a hand needle that has a split/open end, and put needle through the same hole the thread is in and pull the knot inside the sandwich, pulling the needle about an inch across and back out. Then cut the exposed thread. This way the thread ends are secure and hidden. - Try to weave the thread through the batting so it does not show through the fabric. This can be an issue with white/light colored fabric.
#50
Power Poster
Join Date: Apr 2011
Location: Ontario, Canada
Posts: 17,858
Thread
Thread Starter
Forum
Replies
Last Post