Bernina users question re applique
#1
What stich # do you use for applique? I was trying to applique some shapes onto baby onsies..couldnt seem to find the right one.
What # & settings do you use?
I have a 640 model.
Thanks for any help suggestions!!
Kim
What # & settings do you use?
I have a 640 model.
Thanks for any help suggestions!!
Kim
#2
I have seen the blanket stitch used with foot number 20 and recently I did a very small straight stitch that I liked even better, I used a zigsag that made my beaks look very bulky on a small stitch. so my sugestion is for you to try and see what stitch you like best
good luck
good luck
#3
I have a Bernina and for a satin stitch I use foot #3, second choice #20. I feed my bobbin thread through the hole in the bobbin case. This makes the top stitch stand up nicely. I use a stablizer underneath (paper works too) and you will need to set your zigzag width and stitch length to match the size of your applique. Do a test sample to make sure everything works the way you want as zigzag is not easy to rip out. Good luck and hope you can understand my explanation.
Thread
Thread Starter
Forum
Replies
Last Post
craftybear
Main
22
07-06-2010 05:51 PM