Best beginner machine????
#31
Junior Member
Join Date: Oct 2015
Posts: 115
Sorry to get this off topic, but I think that the original op on this thread was talking about machines in the sub $1500 street price category. So to tie this back into the original question: after you decide on which machine, a quilt show can be a great place to buy. Even though you are buying at a show, try to find someone that is within driving range to repair it and not three states away. With a longarm or midarm machine you want someone who can come to the house to fix it since it probably isn't going in the trunk to drive to the shop.
Last edited by Clay; 10-08-2016 at 11:23 AM.
#33
Junior Member
Join Date: Oct 2015
Posts: 115
There are three machines in the QVP line. There is not a mini 2200QVP, the mini is the DX2000QVP. It's called the mini because it is the smallest of the QVP series. There is a standup long arm with stitch regulator which is called a TL2200QVP and it comes standard with a 10' frame made by Grace and you can buy a 2' extension to make it a 12' frame. The TL2200QVP with the 10' frame was $7995 at the recent show in Madison, WI. If you wanted the 2' extension or rear handle bars that was an extra option. I almost bought that machine, but we didn't want to make room for that monster. We ended up with the TL2200QVP sitdown machine. Hopefully, I saved you two grand $$$. Keep shopping, that $9995 price is not a good one.
Did you go to the Des Moines Quilt week? I think that Friday was the last day there and I think the same vendors that were at the show in Madison were suppose to be there. Feel free to send me a pm if you have any more questions.
Edited to add one more note: There is ZERO percent financing availabe for 60 months right now even at the sale prices on the longarms. Some want to give you the ZERO percent financing but they want to sell the machine at it's normal street price. The prices I mentioned were again just a special show price, but if you hit it right, there are better deals available out there. Again, it like jewerly. The margins are bigger than you might imagine at first, but no one wants to say that out loud.
Did you go to the Des Moines Quilt week? I think that Friday was the last day there and I think the same vendors that were at the show in Madison were suppose to be there. Feel free to send me a pm if you have any more questions.
Edited to add one more note: There is ZERO percent financing availabe for 60 months right now even at the sale prices on the longarms. Some want to give you the ZERO percent financing but they want to sell the machine at it's normal street price. The prices I mentioned were again just a special show price, but if you hit it right, there are better deals available out there. Again, it like jewerly. The margins are bigger than you might imagine at first, but no one wants to say that out loud.
Last edited by Clay; 10-08-2016 at 12:13 PM.
#34
Senior Member
Join Date: Jun 2012
Location: Missouri
Posts: 354
That's what I did since I had no clue about machines or what I needed. The dealers asked me what I'd be using it for and what I'd like on it. All were kind and patient. I ended up going for a Babylock Melody.
#35
Junior Member
Join Date: Oct 2015
Posts: 115
Boy, did I misread your post earlier Jo Anne. I thought that you said that you found the TL2200 QVP for $9999. I only saw an extra "9" in your number. I made a mistake by only $9000. Sometimes we see what we want to see I guess. When you said 2200, I was thinking that was the list price for that machine and not a good street price.
Apologies again.
On the DX2000 QVP. A grand is a very good price I think and I also think that is a fantastic machine. If it would have been available a year ago, we would have bought that one.
Apologies again.
On the DX2000 QVP. A grand is a very good price I think and I also think that is a fantastic machine. If it would have been available a year ago, we would have bought that one.
#36
Super Member
Join Date: Jun 2016
Location: Belen, NM
Posts: 1,353
If I were you, I would not invest all my budget in one machine. I would probably try to buy a workhorse straight stitch machine similar to a Juki TL 98, 2000 or 2010. They are fantastic machines because of their reliability and stitch quality and then buy a good used high end computerized machine or a inexpensive Brother that has all the bells and whistles for crafting. That way if you are displeased with one machine choice, you may be pleased with the other. I know I sound like an investment coach, but I would diversify.
#37
PaperPrincess and Onebyone have given you great advice.
As you can see, there are a lot of excellent machines out there and each one of us swears that their machine is the best. I am a Pfaff person myself, but I have had and sold Vikings, had Babylocks and have a featherweight. I love the IDT that Pfaff has (Integrated Dual Transportation aka built in walking foot) and would not sew without it. The real answer is that they all make (for the most part) good machines.
Make a list and prioritize it. Try out lots of machines and choose one based on features, cost and the ability to have it repaired locally if the need arises. Do not neglect to look on Craigslist - a lot of time you can find a machine locally for a good price. If you go the route of purchasing from a dealer - DO NOT hesitate to bargain. I was amazed when I worked for Viking the deals they would make. If it is not negotiable on price, they can throw in walking feet, acrylic tables all sorts of stuff! Good luck with your search.
As you can see, there are a lot of excellent machines out there and each one of us swears that their machine is the best. I am a Pfaff person myself, but I have had and sold Vikings, had Babylocks and have a featherweight. I love the IDT that Pfaff has (Integrated Dual Transportation aka built in walking foot) and would not sew without it. The real answer is that they all make (for the most part) good machines.
Make a list and prioritize it. Try out lots of machines and choose one based on features, cost and the ability to have it repaired locally if the need arises. Do not neglect to look on Craigslist - a lot of time you can find a machine locally for a good price. If you go the route of purchasing from a dealer - DO NOT hesitate to bargain. I was amazed when I worked for Viking the deals they would make. If it is not negotiable on price, they can throw in walking feet, acrylic tables all sorts of stuff! Good luck with your search.
Thread
Thread Starter
Forum
Replies
Last Post