Best used sewing machines for leather?
#11
Senior Member
Join Date: Sep 2013
Location: Saskatchewan
Posts: 838
What weight of leather are you using? If it's fairly light, any machine should be okay as long as you use a leather needle and appropriate thread. The heavier the leather, the more difficult it will be.
#12
Super Member
Thread Starter
Join Date: Sep 2011
Location: Mendocino Coast, CA
Posts: 5,007
Thanks everyone. I'm now convinced to go ahead and try using one of my older Singers for the job. The cushions are a simple, square shape, so it shouldn't be too difficult. I'm looking into purchasing a teflon foot, or possibly just using my walking foot to help the machine sew smoothly and evenly. The leather is insanely expensive, so I don't want to screw this up. That being said, a new couch is probably 3-4 times as much, so I guess that I'm, "saving money."
~ C
~ C
#13
Super Member
Thread Starter
Join Date: Sep 2011
Location: Mendocino Coast, CA
Posts: 5,007
A leather needle, and a modern teflon foot for your shank machine might help.
My grandmother recovered her furniture, probably fake leather, but same idea using her singer treadle.
My good friend sewed canvas boat cushions with her featherweight. The right tools for the right fabrics!
What weight thread I wonder? Jeans thread? Button thread, surely not in a machine?
I wonder if 40 weight machine quilting thread would work?
My grandmother recovered her furniture, probably fake leather, but same idea using her singer treadle.
My good friend sewed canvas boat cushions with her featherweight. The right tools for the right fabrics!
What weight thread I wonder? Jeans thread? Button thread, surely not in a machine?
I wonder if 40 weight machine quilting thread would work?
~ C
#14
Super Member
Join Date: Aug 2010
Location: Upstate New York
Posts: 1,231
My neighbors have a very busy business just repairing leather clothing, and sewing patches on leather. They almost exclusively use Singer treadles. I did convince them to try a "newer" (than their treadle, LOL), vintage electric Singer because it had reverse on it...it worked but they went right back to their treadles!
#15
Super Member
Join Date: Aug 2011
Location: kansas
Posts: 6,407
when my kids were doing 4H horse shows, I made leather chaps on my old all metal Deluxe machine--use a leather needle. This was fairly heavy leather so I also used a bit longer stitch length. Worked fine, even putting in heavy duty zippers. I know have an old (50's) industrial Consew--it's a beast--goes forward/reverse but can sew anything.
#17
I'm planning to sew some pieced leather pillows and recover some couch cushions with a medium-weight leather. I have a few, old, domestic Singers that might do the job, but they're not walking foot machines and I worry that they might not be strong enough. Does anyone have experience sewing on "leather machines?" If so, which machines can you recommend for the home sewer?
Thanks,
C
Thanks,
C
#18
Senior Member
Join Date: Mar 2011
Location: Oregon
Posts: 685
As long as you are using apparel weight leather, a vintage machine with a leather needle is fine. My DH is a leather worker. I started him with a 1960’s white machine that I didn’t care about. It worked ok, but I eventually found an industrial pre WWI needle feed machine on Craigslist for $300. It does a nicer stitch, and longer stitch, but I would only recommend the industrial if you are going to do leather work regularly.
#19
Member
Join Date: May 2012
Location: Lisbon, NY
Posts: 31
I have my Mom's Singer 201 and it's fantastic. Sews through almost anything. It's a real workhorse of a machine. A couple of hints for sewing leather. Like someone else suggested, be sure to get a leather needle. Second, use a longer stitch. If it's too short, it becomes like a perforation and the leather pulls apart.
#20
Super Member
Join Date: Jan 2011
Posts: 1,079
If your layers are very thick, you may run into the issue of presser foot lift. Some newer machines may sew through the leather with the correct needle, but the presser foot won't lift high enough to get thick layers under it. I have run into this issue when hemming jeans also.
Also, stitch a bit slowly so your needle has time to clear the leather between stitches.
edit: My sis swears that putting a bit of regular scotch tape on the bottom of her presser foot makes it slick like the teflon feet. She says it works great on her vinyl projects.
Also, stitch a bit slowly so your needle has time to clear the leather between stitches.
edit: My sis swears that putting a bit of regular scotch tape on the bottom of her presser foot makes it slick like the teflon feet. She says it works great on her vinyl projects.
Last edited by mindless; 06-30-2019 at 10:36 PM.
Thread
Thread Starter
Forum
Replies
Last Post
lverano
For Vintage & Antique Machine Enthusiasts
6
01-14-2018 10:02 PM
Windblown
For Vintage & Antique Machine Enthusiasts
18
11-22-2013 07:16 PM
SingerSewer
Main
10
06-22-2013 06:24 AM
magpiefeather
Pictures
17
05-06-2011 10:45 PM