Binding a flannel rag quilt
#1
Senior Member
Thread Starter
Join Date: Feb 2010
Location: Ft. Myers, Florida
Posts: 928
Can anyone tell me how to bind my flannel rag quilt? I'd like an "almost" traditional binding, only I'd like to be able to rag it like the rest of the quilt, not have it smooth. Thank you.
#2
i used 2 1/2 inch flannel strips to bind mine. just like i do regular quilts.i'm not sure what you mean about binding it but not wanting it smooth. i would think you would just rag the edges of the blocks and leave it. not bind at all in other words.
#5
Senior Member
Thread Starter
Join Date: Feb 2010
Location: Ft. Myers, Florida
Posts: 928
I want it to look finished, and when I made my daughter's, I left the edges raw and clipped them, but I wasn't satisified with the look, I guess I want it to have a binding but also be able to fray it like the quilt.
#7
Senior Member
Thread Starter
Join Date: Feb 2010
Location: Ft. Myers, Florida
Posts: 928
No the quilt police probably don't, but my son-in-law (who the quilt is for) certainly does have my address. I truly want it to be a nice quilt as he asked me to make him a quilt after seeing the ones (not rag) that I made for my daughter and their children. Because he wanted a "soft" quilt, I thought a flannel rag quilt was the way to go. :roll: And if you happen to run into the quilt police, please don't tell them where I am :mrgreen:
#8
Power Poster
Join Date: Dec 2008
Location: Western Wisconsin
Posts: 12,930
I would just use one or two layers of flannel to bind the quilt, leaving the edges free to fray.
Here's how I would go about doing this. I'd cut maybe a 5-inch or 6-inch strip of flannel. I'd spray starch the inside and iron a fold into it. (The spray starch will sort of glue the layers together.) At this point you could cut the fold if you want, or else leave it and cut after the binding is on the quilt.
I'd fold this doubled layer of flannel strip in half and then unfold it, so the crease tells me where the center of it is.
Note: Adjust the size of the binding strips as needed. I would probably want to bind this kind of quilt with the sewing a half-inch from the edge. Add whatever length you want to that for the fraying effect.
Also, I'm assuming you want fraying on both sides of the quilt. If you just want the fraying on one side, I would lay the binding out flat and sew it on to the wrong side of the quilt through the center fold half-an-inch from the quilt edge. Then I would wrap the flannel to the top side of the quilt and topstitch through both layers, using the stitching from the wrong side as a guide for placing the topstitching. (This would be a good place to use a decorative stitch.) That would leave all the raw edges to be frayed on one side of the quilt.
At this point I would enclose the quilt edge with the binding (aligning the quilt edge with the fold in the binding) and sew it on from the top, perhaps using a decorative stitch. I would then cut the edges of the binding just as if they were exposed seams, so these edges would rag in the washer and dryer.
Instead of using a single layer of flannel folded, you could iron two different flannels together (or even three) to have a more varied color in the frayed binding edge. If doing this, I would spray starch the layers together before cutting. This would keep the layers together and also prevent them from stretching out of shape when you sew the binding on.
Here's how I would go about doing this. I'd cut maybe a 5-inch or 6-inch strip of flannel. I'd spray starch the inside and iron a fold into it. (The spray starch will sort of glue the layers together.) At this point you could cut the fold if you want, or else leave it and cut after the binding is on the quilt.
I'd fold this doubled layer of flannel strip in half and then unfold it, so the crease tells me where the center of it is.
Note: Adjust the size of the binding strips as needed. I would probably want to bind this kind of quilt with the sewing a half-inch from the edge. Add whatever length you want to that for the fraying effect.
Also, I'm assuming you want fraying on both sides of the quilt. If you just want the fraying on one side, I would lay the binding out flat and sew it on to the wrong side of the quilt through the center fold half-an-inch from the quilt edge. Then I would wrap the flannel to the top side of the quilt and topstitch through both layers, using the stitching from the wrong side as a guide for placing the topstitching. (This would be a good place to use a decorative stitch.) That would leave all the raw edges to be frayed on one side of the quilt.
At this point I would enclose the quilt edge with the binding (aligning the quilt edge with the fold in the binding) and sew it on from the top, perhaps using a decorative stitch. I would then cut the edges of the binding just as if they were exposed seams, so these edges would rag in the washer and dryer.
Instead of using a single layer of flannel folded, you could iron two different flannels together (or even three) to have a more varied color in the frayed binding edge. If doing this, I would spray starch the layers together before cutting. This would keep the layers together and also prevent them from stretching out of shape when you sew the binding on.
Thread
Thread Starter
Forum
Replies
Last Post
craftybear
Links and Resources
3
05-07-2011 10:05 AM
craftybear
Links and Resources
3
12-25-2010 09:49 PM
Andrea7
Main
12
05-05-2010 05:50 PM