Brocade quilt
#5
We have a quilt made from heavy brocade patches on the front, midweight denim on the back, no batting; my husband's uncle made it for us. It's heavy and warm and we love it, but I'd buy a couple of heavy-duty needles before piecing!
#6
Originally Posted by misseva
maybe a crazy quilt???
#9
Member
Thread Starter
Join Date: Nov 2010
Location: California
Posts: 90
I decided to do the 10 minute square. Boy, cutting the material is a big undertaking because they fray so much! Also aligning the edges with pins & taking them from the table to my sewing machine is a pain. so what I did was run the edges thru the candle flame to prevent fraying. The result is ok, but pretty bulky. will post pics soon. I've finished 9 squares but cannot decide what to use for backing. any suggestions? should i also use batting in the middle?
#10
Member
Join Date: Nov 2010
Posts: 24
If you're considering using brocade for a quilt that is intended for actual use, consider whether there are cats or dogs in the home that might get at it--brocade shreds easily under a cat's kneading claws where a cotton quilt would stand up for years.
You can seal the edges of brocade with a fray stopper (basically just crazy glue--you can use standard crazy glue, too). But sometimes that leaves sharp, hard edges (like the bulkiness mentioned above) if you use too much, so if you don't have a lot of experience working with brocade (and even if you do), you might want to consider running an overlock (or zigzag, if your machine doesn't do overlock) stitch along the edge of each piece as soon as you're finished cutting it--it takes a lot more work, but it results in a softer finished product--you can never wash out burnt or glued edges.
You can seal the edges of brocade with a fray stopper (basically just crazy glue--you can use standard crazy glue, too). But sometimes that leaves sharp, hard edges (like the bulkiness mentioned above) if you use too much, so if you don't have a lot of experience working with brocade (and even if you do), you might want to consider running an overlock (or zigzag, if your machine doesn't do overlock) stitch along the edge of each piece as soon as you're finished cutting it--it takes a lot more work, but it results in a softer finished product--you can never wash out burnt or glued edges.
Thread
Thread Starter
Forum
Replies
Last Post