Crazy Quilt fabric stabilizing question
#1
I've been collecting an assortment of fabrics to make my first crazy quilt. From what I've been told, I need to iron stabilizer onto the backs of the flimsy/slick/etc fabrics....then sew them onto my muslin base. I ironed a few onto what was supposed to be light stabilizer that I bought on the web, just for a trail. The piece of fabric sort of turned into a piece of cardboard, and by the time I folded (or attempted to fold) the raw edge under or layered on another piece of fabric, I hated the result.
I'm beginning to think I got some bad advice (even though it matches what I've read on Crazy Quilting sites and books). Or, perhaps I bought totally wrong stabilizer. Or, I'm flat out doing it wrong. Is there a better way to work with satins and such, or do they require this kind of stabilization? Would using basting spray or something like that work? Any hints would be welcome - because this is driving me CRAZY!
I'm beginning to think I got some bad advice (even though it matches what I've read on Crazy Quilting sites and books). Or, perhaps I bought totally wrong stabilizer. Or, I'm flat out doing it wrong. Is there a better way to work with satins and such, or do they require this kind of stabilization? Would using basting spray or something like that work? Any hints would be welcome - because this is driving me CRAZY!
#4
Super Member
Join Date: Apr 2007
Location: Alturas, CA
Posts: 9,393
The iron on stabilizers I've seen, have to be ironed on with a hot iron, which is most likely too hot for the fabric. Maybe do a double layer of the same fabric instead of the stabilizer. That's my opinion. Good luck.
#6
Thanks for the responses! I have a couple follow-up questions. The reason given for using stabilizer was that "slickery" fabrics need to be anchored in order to work with them. Is this really not the case? (I'm new to sewing anything but cotton.)
Mary, did the lame present any problems with shifting while sewing?
Moonpi, I'm having trouble visualizing this. Did you sew onto any kind of overall "backing" fabric, or just sew or iron individual pieces to stabilizer and the stabilizer acted as the backing?
Pocoellie, yep - been there, did that, luckily on a small piece that darn near looked like seersucker when I lifted the iron. Wouldn't a double layer of slick fabric be twice as slippery?
Sorry to be so obtuse on this, I just don't know how to get started on this project. Anyone have some "idiot proof" instructions, or is this just one of those "go for it" projects? I guess I'm scared to waste some of my nice scraps by starting off wrong.
Mary, did the lame present any problems with shifting while sewing?
Moonpi, I'm having trouble visualizing this. Did you sew onto any kind of overall "backing" fabric, or just sew or iron individual pieces to stabilizer and the stabilizer acted as the backing?
Pocoellie, yep - been there, did that, luckily on a small piece that darn near looked like seersucker when I lifted the iron. Wouldn't a double layer of slick fabric be twice as slippery?
Sorry to be so obtuse on this, I just don't know how to get started on this project. Anyone have some "idiot proof" instructions, or is this just one of those "go for it" projects? I guess I'm scared to waste some of my nice scraps by starting off wrong.
#7
Super Member
Join Date: Apr 2008
Location: Gulf Coast, FL
Posts: 1,420
The stuff you really need is called interfacing. Stabilizer mainly is used in embroidery machines. Interfacing like stabilizer comes in various weights. You should look for a "mid to light weight" interfacing. Not the kind for cuffs-collars - it will be much to stiff. You can sort of tell if it's the right stuff because it will glide over your hands and doesn't have much body to it. More of a drape.
Now... If you want to "deal" and get through the stuff you bought you can go ahead and use it, sew it in like you were planning to and then once the quilt top is done you can "tear-away" the stabilizer that way the fabrics in your quilt wont be "stiff" forever. I made the exact mistake you're talking about in the baby clothes quilt in my avatar, but I'd already spent so much money in stabilizers and interfacings that I just dealt with the blocks that made with the wrong stuff.
Now... If you want to "deal" and get through the stuff you bought you can go ahead and use it, sew it in like you were planning to and then once the quilt top is done you can "tear-away" the stabilizer that way the fabrics in your quilt wont be "stiff" forever. I made the exact mistake you're talking about in the baby clothes quilt in my avatar, but I'd already spent so much money in stabilizers and interfacings that I just dealt with the blocks that made with the wrong stuff.
#8
Super Member
Join Date: Apr 2008
Location: Gulf Coast, FL
Posts: 1,420
Oh and if you were using a double layer of the fabrics you could spray them together using a spray adhesive also known as basting spray. This will give them body and keep them together. It will also provide better "wear" because of the added thickness.
#10
Super Member
Join Date: Apr 2007
Location: Alturas, CA
Posts: 9,393
Whenever I'm working with slippery, slinky, stretchy etc., fabric I hand baste every seam. I don't think working with 2 pieces of the fabric would be twice as slippery though, at least it hasn't been when I've done it.
Thread
Thread Starter
Forum
Replies
Last Post
kaleda
Main
11
05-12-2013 11:01 AM