Does Anyone Use An Ironrite Mangle Anymore?
#1
I picked up an old Model 85 Ironrite Mangle at an auction the other day. An old antique store was being liquidated, so I bought it just for the heck of it. I’ve got it at the shop, but I haven’t gotten to fiddle with it to see if it will still work. I don’t really have an application for it, but wondered if it would be handy for pressing yardage fabric?
CD in Oklahoma
CD in Oklahoma
#4
Senior Member
Join Date: Mar 2010
Location: Pittsburgh, PA
Posts: 768
Yes, it will be wonderful for yardage. In fact, there wasn't anything that needed to be ironed (that meant just about everything in the 60's and 70's) that I didn't iron on my Ironrite.
It will take some practice to get good at it. It is operated with a knee lever. I hope it came with a user's manual. You'll need some instructions.
A bit of advice - before you try to use it, make sure it has a good supply of oil. It needs it just like your car engine does; you pour it right in. It uses a very fine grade of oil. Only problem - I don't know where you can buy it nowadays. Maybe if you google it you come up with something. Good luck!
It will take some practice to get good at it. It is operated with a knee lever. I hope it came with a user's manual. You'll need some instructions.
A bit of advice - before you try to use it, make sure it has a good supply of oil. It needs it just like your car engine does; you pour it right in. It uses a very fine grade of oil. Only problem - I don't know where you can buy it nowadays. Maybe if you google it you come up with something. Good luck!
#6
I took photos and test operated my Ironrite. It works! The roller motor runs and the heating element works, but the knee levers to stop and raise the roller don’t respond correctly. I’m hoping they just need adjustment. I couldn’t run it for long because it needs oil in the gearbox. From what I understand, the Ironrite Oil was a 50 weight non-detergent oil. Some sites that I’ve found say that SAE 40 oil can be used, so I’ll look around and see what I can find locally. I doubt that I’ll be able to find actual “Ironrite Oil” anymore.
The outside of the metal cabinet has rusty scuffed areas and will need to be repainted, but otherwise, it’s not been banged around too much. This model was made in the late 40s and early 50s, and with a serial number of AB315547. I’d guess this one is an early 50s model.
CD in Oklahoma
The outside of the metal cabinet has rusty scuffed areas and will need to be repainted, but otherwise, it’s not been banged around too much. This model was made in the late 40s and early 50s, and with a serial number of AB315547. I’d guess this one is an early 50s model.
CD in Oklahoma
Ironrite Model 85 Closed
[ATTACH=CONFIG]211275[/ATTACH]
Ironrite Model 85 Open
[ATTACH=CONFIG]211276[/ATTACH]
#7
Senior Member
Join Date: Mar 2010
Location: Pittsburgh, PA
Posts: 768
Originally Posted by ThayerRags
I took photos and test operated my Ironrite. It works! The roller motor runs and the heating element works, but the knee levers to stop and raise the roller don’t respond correctly. I’m hoping they just need adjustment. I couldn’t run it for long because it needs oil in the gearbox. From what I understand, the Ironrite Oil was a 50 weight non-detergent oil. Some sites that I’ve found say that SAE 40 oil can be used, so I’ll look around and see what I can find locally. I doubt that I’ll be able to find actual “Ironrite Oil” anymore.
The outside of the metal cabinet has rusty scuffed areas and will need to be repainted, but otherwise, it’s not been banged around too much. This model was made in the late 40s and early 50s, and with a serial number of AB315547. I’d guess this one is an early 50s model.
CD in Oklahoma
The outside of the metal cabinet has rusty scuffed areas and will need to be repainted, but otherwise, it’s not been banged around too much. This model was made in the late 40s and early 50s, and with a serial number of AB315547. I’d guess this one is an early 50s model.
CD in Oklahoma
also a roller cover for $36.99 (looks like you could use a new one), and there's also a service manual available for a few dollars.
What is the lever doing? If I remember correctly, you use your knee to push it to the right and release it, the roller will come down and start rolling against the iron and just keep rolling until you stop it by pushing the level again to release it. If you push the level to the right and hold it there, the roller will come down on the iron, roll for a few seconds, then lift up, come down again, roll, and lift up again, and just keeps repeating this process until you release the lever. Is this what yours is doing?
#8
Originally Posted by Carol's Quilts
..."User's Manual for Ironrite Mangle... Model 85 Instruction Manual ... a roller cover ... also a service manual ...
There’s very little oil in the gearbox, so I didn’t run it long enough to really determine how the levers respond or what they need. I’ll test them better once I get some oil in it.
Thanks for your help.
CD in Oklahoma
#9
Senior Member
Join Date: Mar 2010
Location: Pittsburgh, PA
Posts: 768
Originally Posted by ThayerRags
Originally Posted by Carol's Quilts
..."User's Manual for Ironrite Mangle... Model 85 Instruction Manual ... a roller cover ... also a service manual ...
There’s very little oil in the gearbox, so I didn’t run it long enough to really determine how the levers respond or what they need. I’ll test them better once I get some oil in it.
Thanks for your help.
CD in Oklahoma
Thread
Thread Starter
Forum
Replies
Last Post
Rhonda
General Chit-Chat (non-quilting talk)
222
01-23-2021 08:02 AM
bearisgray
General Chit-Chat (non-quilting talk)
25
05-31-2010 06:43 PM
middysmom
General Chit-Chat (non-quilting talk)
121
04-24-2010 06:37 AM