Encoder problems on a long arm, please help
#1
Encoder problems on a long arm, please help
I've been helping a friend set up her long arm. It's a Husqvarna Platinum 3000.
It was professionally serviced and disassembled for moving. We've reassembled it. Now the encoders are registering negative numbers and we're not sure why.
Any ideas or assistance helpful, thanks!
It was professionally serviced and disassembled for moving. We've reassembled it. Now the encoders are registering negative numbers and we're not sure why.
Any ideas or assistance helpful, thanks!
#2
Power Poster
Join Date: Dec 2008
Location: Western Wisconsin
Posts: 12,930
I found this group on Yahoo, but there are only 21 members and it is not very active. Still, if you join the group, you might be able to get some help there. https://groups.yahoo.com/neo/groups/Platinum3000/info
Did you install the encoders before installing the machine? According to this PDF, that is the proper order:
http://www.husqvarnaviking.com/SiteM...l.pdf?ext=.pdf
I found these Youtube videos, but don't know if they will help:
https://www.youtube.com/watch?v=LQ2-JIXxmGQ
https://www.youtube.com/watch?v=AaqA...-Cg0Y88DaFK9ck
Here is a link to the entire series of Youtube videos that includes the link directly above:
https://www.youtube.com/playlist?lis...-Cg0Y88DaFK9ck
Did you install the encoders before installing the machine? According to this PDF, that is the proper order:
http://www.husqvarnaviking.com/SiteM...l.pdf?ext=.pdf
I found these Youtube videos, but don't know if they will help:
https://www.youtube.com/watch?v=LQ2-JIXxmGQ
https://www.youtube.com/watch?v=AaqA...-Cg0Y88DaFK9ck
Here is a link to the entire series of Youtube videos that includes the link directly above:
https://www.youtube.com/playlist?lis...-Cg0Y88DaFK9ck
#6
OK,
And the answer to this problem was---------
the motor box direction had gotten reversed in the settings.
How this happened is a great mystery as we hadn't even gotten into that area of the tablet/programming. Re-set to factory default cleared the problem (and so would have changing motor box direction in the settings).
My current working theory is that the tablet battery totally discharged and on re-powering did some funky stuff of it's own, likely in revenge for letting everything sit for a couple months!
And the answer to this problem was---------
the motor box direction had gotten reversed in the settings.
How this happened is a great mystery as we hadn't even gotten into that area of the tablet/programming. Re-set to factory default cleared the problem (and so would have changing motor box direction in the settings).
My current working theory is that the tablet battery totally discharged and on re-powering did some funky stuff of it's own, likely in revenge for letting everything sit for a couple months!
Thread
Thread Starter
Forum
Replies
Last Post
mjpEncinitas
Links and Resources
26
11-28-2019 06:48 AM
thseabreze
Main
14
06-27-2017 05:23 AM