First Hand quilting question - basting
#1
I have a couple of questions about basting. I taped the backing to the floor and safety pinned it, and now am thread basting.
1. How long should basting stitches be? Is there such a thing as too long?
2. After thread basting, I take the safety pins out, right?
Thanks!
1. How long should basting stitches be? Is there such a thing as too long?
2. After thread basting, I take the safety pins out, right?
Thanks!
#2
I myself just use safety pins to baste. I don't think you have to do both, just one or the other. Depending on how much excess batting and backing fabric you have I would run a basting stitch around the outside edge (you can do this with your machine) just to make sure all of the layers stay square to one another and one doesn't get pulled in or shifted from the amount of quilting you may be doing. The first quilt I made I didn't do that and at one point I noticed the backing fabric was no longer big enough! Hope this helps.
#3
Originally Posted by LeslieTQD
I myself just use safety pins to baste. I don't think you have to do both, just one or the other. Depending on how much excess batting and backing fabric you have I would run a basting stitch around the outside edge (you can do this with your machine) just to make sure all of the layers stay square to one another and one doesn't get pulled in or shifted from the amount of quilting you may be doing. The first quilt I made I didn't do that and at one point I noticed the backing fabric was no longer big enough! Hope this helps.
#4
Either baste or pins. Both is over kill.
If basting - I like the Sharon Schambert method - kind of a zig zag instead of thread going in a straight line.
I find basting a pain if I'm machine quilting because if I don't pull the thread out as I go, it gets caught up in the foot, and if I sew over it, sometimes it's hard to get out.
If pinning, I just put one where ever there is an area more than 6", and not on a seam. Then whenever I get close, I just remove the pin.
If basting - I like the Sharon Schambert method - kind of a zig zag instead of thread going in a straight line.
I find basting a pain if I'm machine quilting because if I don't pull the thread out as I go, it gets caught up in the foot, and if I sew over it, sometimes it's hard to get out.
If pinning, I just put one where ever there is an area more than 6", and not on a seam. Then whenever I get close, I just remove the pin.
#5
Super Member
Join Date: Feb 2010
Location: Maryland
Posts: 3,586
Originally Posted by tjradj
Either baste or pins. Both is over kill.
If basting - I like the Sharon Schambert method - kind of a zig zag instead of thread going in a straight line.
I find basting a pain if I'm machine quilting because if I don't pull the thread out as I go, it gets caught up in the foot, and if I sew over it, sometimes it's hard to get out.
If pinning, I just put one where ever there is an area more than 6", and not on a seam. Then whenever I get close, I just remove the pin.
If basting - I like the Sharon Schambert method - kind of a zig zag instead of thread going in a straight line.
I find basting a pain if I'm machine quilting because if I don't pull the thread out as I go, it gets caught up in the foot, and if I sew over it, sometimes it's hard to get out.
If pinning, I just put one where ever there is an area more than 6", and not on a seam. Then whenever I get close, I just remove the pin.
#6
Originally Posted by LeslieTQD
I would run a basting stitch around the outside edge (you can do this with your machine) just to make sure all of the layers stay square to one another and one doesn't get pulled in or shifted from the amount of quilting you may be doing. The first quilt I made I didn't do that and at one point I noticed the backing fabric was no longer big enough! Hope this helps.
#7
I always use only safety pins when I baste for machine quilting, but both DH's grandma and a tute I found online said to safety pin and then thread baste. It is twice as much work, obviously.
Virtualbernie - how do you thread baste? Do you pin first? It's too late for this quilt, obviously, but if there's an easier way than what i've done, I'd like to have the info.
Virtualbernie - how do you thread baste? Do you pin first? It's too late for this quilt, obviously, but if there's an easier way than what i've done, I'd like to have the info.
#8
Super Member
Join Date: Feb 2010
Location: Maryland
Posts: 3,586
Originally Posted by Butterflyblue
I always use only safety pins when I baste for machine quilting, but both DH's grandma and a tute I found online said to safety pin and then thread baste. It is twice as much work, obviously.
Virtualbernie - how do you thread baste? Do you pin first? It's too late for this quilt, obviously, but if there's an easier way than what i've done, I'd like to have the info.
Virtualbernie - how do you thread baste? Do you pin first? It's too late for this quilt, obviously, but if there's an easier way than what i've done, I'd like to have the info.
And no, I don't pin baste ever! Too much work!
Thread
Thread Starter
Forum
Replies
Last Post