Help!!! I just finished quilting
#1
a top with batting. The pattern calls for quilting the top with the batting only and then add the bottom later.
I had a hard time moving my fabric. I tried with the feed dogs down and with the feed dogs up. The batting also left a slight sticky residue. I'm sure that was part of the problem in not being able to move the fabric easily when quilting.
Has anyone quilted this way before? Did you put a tear away stabilizer on the batting or did you use something else to make the piece move easier?
I'm also having a hard time getting the residue off from my machine.
I believe the batting is 80/20, but I'm not sure because it was out of the bag.
Thanks!!
I had a hard time moving my fabric. I tried with the feed dogs down and with the feed dogs up. The batting also left a slight sticky residue. I'm sure that was part of the problem in not being able to move the fabric easily when quilting.
Has anyone quilted this way before? Did you put a tear away stabilizer on the batting or did you use something else to make the piece move easier?
I'm also having a hard time getting the residue off from my machine.
I believe the batting is 80/20, but I'm not sure because it was out of the bag.
Thanks!!
#5
Do not despair. I am not sure about the residue, but the sewing with just the top and batting is sometimes done to hide the stitching in multiple colors. If you use newsprint paper like they use in kindergarten, becasue of the large size, this will work well. You then just tear it away. Even some cheaper wrapping paper will do the trick and comes on large rolls at the Dollar Stores. Hope this works for you.
Ellis' Granny B
Ellis' Granny B
#6
Hi,
I have quilted items like that. There is a local designer in our area called Debra Gabel. She makes delightful wallhanging patterns under the name Zebra.
I don't do a lot of machine quilting but I like to use decorative stitches and lots of decorative thread. She recommends quilting her designs with just the batting and top. It does hide a lot of problems.
Your problem may have been because you had the batting up side down. Batting does have a right and wrong side. Half the time I can't tell the difference but there is one. If you examine it closely there is a scrim on one side. It kind of holds the fibers together. Using a paper stabilizer helps so does car waxing your machine table surface. That also makes the fabric move easily. The tigher woven and thinner the batting the better success you will have.
Good luck
I have quilted items like that. There is a local designer in our area called Debra Gabel. She makes delightful wallhanging patterns under the name Zebra.
I don't do a lot of machine quilting but I like to use decorative stitches and lots of decorative thread. She recommends quilting her designs with just the batting and top. It does hide a lot of problems.
Your problem may have been because you had the batting up side down. Batting does have a right and wrong side. Half the time I can't tell the difference but there is one. If you examine it closely there is a scrim on one side. It kind of holds the fibers together. Using a paper stabilizer helps so does car waxing your machine table surface. That also makes the fabric move easily. The tigher woven and thinner the batting the better success you will have.
Good luck
#9
i use this method often. there are almost as many ways to add the backing to this as there are to any other top.
you can lay the quilted top onto the batting and tack or tie.
you can add more quilting to hold the two together.
you can also remove 1/4" to 1/2" of the batting around the edges, lay the backing face-down onto the top, stitch all the way around (leaving a gap for turning), then turn it righside out like you would a pillow, and whipstitch the gap closed.
then, either tack, tie, or add more quilting as if you'd done it the traditional way. i really love it when i can use this method because i don't need no stinkin' binding. :P
you can lay the quilted top onto the batting and tack or tie.
you can add more quilting to hold the two together.
you can also remove 1/4" to 1/2" of the batting around the edges, lay the backing face-down onto the top, stitch all the way around (leaving a gap for turning), then turn it righside out like you would a pillow, and whipstitch the gap closed.
then, either tack, tie, or add more quilting as if you'd done it the traditional way. i really love it when i can use this method because i don't need no stinkin' binding. :P
#10
Senior Member
Join Date: Jul 2008
Posts: 909
Originally Posted by PatriceJ
you can also remove 1/4" to 1/2" of the batting around the edges, lay the backing face-down onto the top, stitch all the way around (leaving a gap for turning), then turn it righside out like you would a pillow, and whipstitch the gap closed. then, either tack, tie, or add more quilting as if you'd done it the traditional way. i really love it when i can use this method because i don't need no stinkin' binding. :P
Thread
Thread Starter
Forum
Replies
Last Post
Mama879
Pictures
15
01-19-2014 09:38 AM
PurpleBecca
Pictures
52
05-05-2010 12:35 PM