Help with table runner
#1
Hi all, I just finished a table runner,the pattern I have used many times before, and this one tends to ripple along the edges.
Can any one offer some suggestions as to what I did wrong and how I can corect it?
Thanks,
Bonnie
Can any one offer some suggestions as to what I did wrong and how I can corect it?
Thanks,
Bonnie
#6
Difference in quilting density between the center and the edges can cause this. Also if your outer edges next to binding are bias edges...same thing. Pull edge horiz and vertically...gently. One side should resist...this is the straight of grain side. If both ways give, you are on bias all around.
#7
Originally Posted by Johanna Fritz
Difference in quilting density between the center and the edges can cause this. Also if your outer edges next to binding are bias edges...same thing. Pull edge horiz and vertically...gently. One side should resist...this is the straight of grain side. If both ways give, you are on bias all around.
Thread
Thread Starter
Forum
Replies
Last Post
craftybear
Links and Resources
11
09-04-2011 05:01 PM
craftybear
Links and Resources
0
08-31-2011 02:13 PM
craftybear
Links and Resources
12
08-29-2011 11:36 PM