Help! Top thread keeps breaking!
#1
OK - I'm stabilising the edge of a quilt before binding and my top thread keeps breaking. Tension is set where it always is for this - 3.5. I changed the needle for a new one, I even tried a different spool of thread in case it was 'faulty' although it's the same brand I always use and never had trouble before. And I unthreaded and rethreaded in case something was wrong there. It sews for about a foot then snaps! Grrrr! I'd just SID quilted the whole quilt with it - no problem; it's a new (to me) machine I recently bought off a friend and I can't believe it's faulty; any ideas, anyone?
#3
Senior Member
Join Date: Nov 2008
Location: Pacific NW USA
Posts: 883
It is almost always: Needle, Thread or Tension.
Is the eye of the needle large enough for the thread?
Also, Needles can be faulty.
Is your bobbin area clean?
Is the thread getting caught on the spool?
You are positive the machine is threaded correctly?
If everything else seems fine, adjust your upper tension.
Is the eye of the needle large enough for the thread?
Also, Needles can be faulty.
Is your bobbin area clean?
Is the thread getting caught on the spool?
You are positive the machine is threaded correctly?
If everything else seems fine, adjust your upper tension.
#4
you can open a door on the end of the head, where the light bulb is. I had a look in there but couldn't see anything. I've put it away in disgust and got the old one back out! I thought of getting DH to have a look at it tomorrow - he's home late tonight and probably the last thing he'll want to do is surgery on my sewing machine! I just thought maybe someone here had had the same problem and could think of something I missed! How would I check the threading path other than what I've done?
#5
Originally Posted by AtHomeSewing
It is almost always: Needle, Thread or Tension.
Is the eye of the needle large enough for the thread?
Also, Needles can be faulty.
Is your bobbin area clean?
Is the thread getting caught on the spool?
You are positive the machine is threaded correctly?
If everything else seems fine, adjust your upper tension.
Is the eye of the needle large enough for the thread?
Also, Needles can be faulty.
Is your bobbin area clean?
Is the thread getting caught on the spool?
You are positive the machine is threaded correctly?
If everything else seems fine, adjust your upper tension.
#7
Originally Posted by Ducky
K, this may be a stupid question, so forgive me.... Did you call your friend and ask if she ever had the same problem?
#8
Power Poster
Join Date: Dec 2008
Location: Western Wisconsin
Posts: 12,930
There can be lint stuck between the tension discs in the upper thread path. If you have some *unwaxed* dental floss, you can try sawing that back and forth between the discs. (Do not used waxed dental floss!)
You didn't change the bobbin, did you? I once fixed a machine that was having this problem because the user had inserted the wrong plastic bobbin (one for another machine). The two bobbins looked very similar so it was an easy mistake to make.
If there is a tiny piece of thread caught anywhere in the lower area, that can cause this problem also. I usually take the entire bobbin assembly out and look carefully everywhere to see if I can spot a piece of thread. Check the bobbin case also; sometimes there is a tiny piece of thread caught in the spring tension mechanism where the thread feeds out.
Also check that the thread on top is not getting caught in the spool as it unwinds. I have had it hang up intermittently on the little nick in the spool designed to hold the thread end in place, and that can cause the thread to break too.
You didn't change the bobbin, did you? I once fixed a machine that was having this problem because the user had inserted the wrong plastic bobbin (one for another machine). The two bobbins looked very similar so it was an easy mistake to make.
If there is a tiny piece of thread caught anywhere in the lower area, that can cause this problem also. I usually take the entire bobbin assembly out and look carefully everywhere to see if I can spot a piece of thread. Check the bobbin case also; sometimes there is a tiny piece of thread caught in the spring tension mechanism where the thread feeds out.
Also check that the thread on top is not getting caught in the spool as it unwinds. I have had it hang up intermittently on the little nick in the spool designed to hold the thread end in place, and that can cause the thread to break too.
#9
I DID change the bobbin! I'll go and change it back to the metal one that came with it! I thought the one I put in would fit - they're the universal ones I got and used fine with my old machine; will let you know how i get on! Thanks!
#10
Super Member
Join Date: Mar 2008
Location: Nottingham, UK
Posts: 1,287
K
My old Pfaff used to play up sometimes like this & usually it was the tension discs needing adjusting only very slightly. On one occassion I discovered it was due to an uneven threaded bobbin. Sorry other than that I don't know what to suggest - maybe:
Stroke it gently & tell it Mummys loves you - SO GET TO WORK :lol:
Tisha - Good Luck :wink:
My old Pfaff used to play up sometimes like this & usually it was the tension discs needing adjusting only very slightly. On one occassion I discovered it was due to an uneven threaded bobbin. Sorry other than that I don't know what to suggest - maybe:
Stroke it gently & tell it Mummys loves you - SO GET TO WORK :lol:
Tisha - Good Luck :wink:
Thread
Thread Starter
Forum
Replies
Last Post
Country1
For Vintage & Antique Machine Enthusiasts
2
03-26-2014 07:45 PM