Help with zig zag on applique
#1
Member
Thread Starter
Join Date: Aug 2012
Location: New Hampshire
Posts: 11
Help with zig zag on applique
I know that this seems like a very basic question but I'm confused. This will be my first time doing an applique with zig zag. I looked at 4 you tube videos and all seem to differ. One says keep both sides of zig zag even catching both sides of fabric, the other says concentrate on keeping it on the inside of the applique. Then there is the length and with. I did do a practice applique and I did not like the results. I need some guidance.
#2
Power Poster
Join Date: May 2008
Location: MN
Posts: 24,666
Make some more samples until you get a look you like? (That sounded sort of flippant - it wasn't meant to be - some people just prefer different looks - and it does take some practice to achieve the look one wants)
Are you using the applique presser foot? It's has a raised area underneath it to accommodate the bulk of the stitching.
Did you use some kind of stabilizer on the back to help minimize puckering?
Also, when you get the look you want, write down what you did and your machine settings.
Are you using the applique presser foot? It's has a raised area underneath it to accommodate the bulk of the stitching.
Did you use some kind of stabilizer on the back to help minimize puckering?
Also, when you get the look you want, write down what you did and your machine settings.
#3
I like to have the appliqué on the left of the needle. When the needle goes to the right, it should almost touch the edge of your appliqué when it goes in to your backing fabric. This way, it is easier to make sure you catch the appliqué.
I use quite small stitches on my Pfaff 1.5 width & 2.0 length, I think. I actually find a 'buttonhole' type stitch easier. It's not as dense as satin stitch and gives a nice finish IMHO. I also use an open-toe foot so I can see where the needle is actually going.
A tip I got from a fellow quilter is that if your foot has a bar across the front, just saw it off! (Think this'll only work if it's plastic, lol).
I use quite small stitches on my Pfaff 1.5 width & 2.0 length, I think. I actually find a 'buttonhole' type stitch easier. It's not as dense as satin stitch and gives a nice finish IMHO. I also use an open-toe foot so I can see where the needle is actually going.
A tip I got from a fellow quilter is that if your foot has a bar across the front, just saw it off! (Think this'll only work if it's plastic, lol).
#4
Super Member
Join Date: Aug 2009
Location: The middle of an IL cornfield
Posts: 7,014
Be sure to stabilize the backing fabric. Personally, I starch it very, very stiff instead of putting anything on the back, but either works well.
I often use the Eleanor Burns turn under method for big pieces of applique and really like the results with that. It allows you to be less picky about how close together the stitches are. If you are not using a method that allows you turn the edge under, you will need to have your stitch length very short. The width can be whatever look you like.
I often use the Eleanor Burns turn under method for big pieces of applique and really like the results with that. It allows you to be less picky about how close together the stitches are. If you are not using a method that allows you turn the edge under, you will need to have your stitch length very short. The width can be whatever look you like.
#5
Member
Thread Starter
Join Date: Aug 2012
Location: New Hampshire
Posts: 11
Hi Lisa, I did us Eleanor Burns method. That part came out fine. Its the zig zag that ruined the piece. I could not salvage it. What a waste of time and fabric. It was a multi layered flower for a wall hanging. I guess I just have to find the right combination of stitch length and width. I just thought someone on the board would have some magic for me, lol
#6
Super Member
Join Date: Oct 2012
Location: Minneapolis, Minnesota
Posts: 1,022
I find that I like the blanket stitch better than the zigzag stitch. I run the straight stitches on the backing fabric just to the right of the applique (which gives a nice outline around the applique) and then the single "zig" stitch goes left into the applique. This is not always good to use on raw-edged appliques unless you are using batiks.
#9
Super Member
Join Date: Oct 2010
Location: Nebraska
Posts: 3,257
#10
Member
Thread Starter
Join Date: Aug 2012
Location: New Hampshire
Posts: 11
Thank you all for your suggestions. I am going to recut some fabric and attemt to zig zag again. This time will go slower, add a running stitch and keep stitches on the left of pattern. Now just have to find the right width and length of stitch. Will practice first.
Thread
Thread Starter
Forum
Replies
Last Post
Tank
For Vintage & Antique Machine Enthusiasts
11
04-11-2024 05:38 AM