how accurate is "accurate enough" ?
#1
Power Poster
Thread Starter
Join Date: May 2008
Location: MN
Posts: 24,666
how accurate is "accurate enough" ?
I've seen several posters say that the thread they use affects the accuracy of their piecing.
How much tolerance do you allow yourself on the "expected/hoped for" finished size of a block or completed item?
PS I am also a fan of Mary Ellen Hopkins "personal measurements" - but there are times when it's nice when a " group standard" is a good thing.
How much tolerance do you allow yourself on the "expected/hoped for" finished size of a block or completed item?
PS I am also a fan of Mary Ellen Hopkins "personal measurements" - but there are times when it's nice when a " group standard" is a good thing.
#2
i want my blocks to finish within 1/16th inch of the measurement. however, some blocks that i've spent a very long time making have been 1/8 too small on some seams. when i realize this, i mark the spots with a pin, and when assembling the quilt, i sew a second seam to strengthen it. of course, this only works if you are pressing the seams to one side.
#4
Power Poster
Join Date: Mar 2011
Location: Ontario, Canada
Posts: 41,548
My Bernina has a quilting foot that gives me a perfect scant 1/4 inch seam. When ironed, the thread and folded over fabric makes my blocks come out almost perfect every time. This is especially important if I am doing several different blocks that I intend to sash and put together. If you are doing all the same blocks than accuracy is not as important as consistency. If the whole quilt is sewn with the same seam allowance throughout, it should go together well.
#5
Super Member
Join Date: Jan 2012
Posts: 4,783
i want my blocks to finish within 1/16th inch of the measurement. however, some blocks that i've spent a very long time making have been 1/8 too small on some seams. when i realize this, i mark the spots with a pin, and when assembling the quilt, i sew a second seam to strengthen it. of course, this only works if you are pressing the seams to one side.
#6
Power Poster
Thread Starter
Join Date: May 2008
Location: MN
Posts: 24,666
IMO -
The seam allowance is an important factor in accuracy , but not the only one.
Other factors:
Fabric preparation
Size of pieces - what one uses to cut with - how one measures
Pressing - can leave little tucks or pleats- can distort the unit
Thread used - some say this makes a big difference - I use a general purpose thread and have been okay with my results
The seam allowance is an important factor in accuracy , but not the only one.
Other factors:
Fabric preparation
Size of pieces - what one uses to cut with - how one measures
Pressing - can leave little tucks or pleats- can distort the unit
Thread used - some say this makes a big difference - I use a general purpose thread and have been okay with my results
#7
Junior Member
Join Date: Apr 2012
Location: Hudsonville, MI
Posts: 110
My Bernina has a quilting foot that gives me a perfect scant 1/4 inch seam. When ironed, the thread and folded over fabric makes my blocks come out almost perfect every time. This is especially important if I am doing several different blocks that I intend to sash and put together. If you are doing all the same blocks than accuracy is not as important as consistency. If the whole quilt is sewn with the same seam allowance throughout, it should go together well.
What foot is it?
#8
I have a Bernina and there are two 1/4" feet for it, one with a guide and one without. I have them both. Bernina feeds the fabric perfectly and makes a great stitch but is no different from other machines when it comes to perfect 1/4" seams. I have to use a self made guide on my Bernina just like all the other machines I have.
I use very thin thread in my bobbin, nothing under 60wt. That makes a big difference.
I use very thin thread in my bobbin, nothing under 60wt. That makes a big difference.
#10
i want my blocks to finish within 1/16th inch of the measurement. however, some blocks that i've spent a very long time making have been 1/8 too small on some seams. when i realize this, i mark the spots with a pin, and when assembling the quilt, i sew a second seam to strengthen it. of course, this only works if you are pressing the seams to one side.
Thread
Thread Starter
Forum
Replies
Last Post
bearisgray
General Chit-Chat (non-quilting talk)
65
02-01-2024 09:04 AM
bearisgray
General Chit-Chat (non-quilting talk)
26
08-18-2013 06:59 PM
greywuuf
For Vintage & Antique Machine Enthusiasts
16
05-09-2012 04:42 PM