How do you treat fabric that bleeds?
#1
Super Member
Thread Starter
Join Date: Aug 2011
Posts: 3,749
How do you treat fabric that bleeds?
The Quilting Article today about pre-washing new fabric stated it is important to treat fabric that bleeds with a salt or vinegar rinse to insure colorfastness.
I would like to know how to make the vinegar and/or salt solution that is used to treat bleeding fabrics.
ANY RECIPES OUT THERE IN QUILTING LAND TO SEND TO A NEWBIE TO QUILTING??? Thanks for your help!
copycat
I would like to know how to make the vinegar and/or salt solution that is used to treat bleeding fabrics.
ANY RECIPES OUT THERE IN QUILTING LAND TO SEND TO A NEWBIE TO QUILTING??? Thanks for your help!
copycat
#2
Salt or vinegar won't do a thing to stop chemical dyes from bleeding. They were mordants for organic dyes but organic dyes aren't used anymore.
Bleeding dyes are only a problem if another fabric picks the dye up.
Bleeding dyes are only a problem if another fabric picks the dye up.
#3
Power Poster
Join Date: Dec 2010
Location: Michigan
Posts: 11,276
Use Retayne, available at many quilt shops and online, for instance:
http://www.amazon.com/Retayne-Color-...ywords=retayne
Treat the fabric as stated on the label, then wash again. If it still bleeds (rare, but it happens) discard it or use it in a wall hanging!
I agree that vinegar, salt etc. worked in the past on the dies that were used then. Most new chemical dies are not affected by any home made treatments.
http://www.amazon.com/Retayne-Color-...ywords=retayne
Treat the fabric as stated on the label, then wash again. If it still bleeds (rare, but it happens) discard it or use it in a wall hanging!
I agree that vinegar, salt etc. worked in the past on the dies that were used then. Most new chemical dies are not affected by any home made treatments.
#5
Banned
Join Date: May 2012
Location: Wisconsin
Posts: 108
I've always used vinegar and it's worked every time. I even made a red and white quilt with JoAnn's Country Classic solids and I've machine washed it since I've finished it and there is not one single spot of red on the white. I just fill put the fabric in the washing machine, dump in half a gallon on white vinegar, fill the machine with cold water just to cover the fabric and let it sit for at least an hour. I then empty out the water, and wash with laundry soap on hot. I throw in a piece of white fabric just to be sure and I've never had a color transfer to the white. I'll probably get flak for this, but, just saying, it has worked for me for years.
#6
Super Member
Join Date: Feb 2011
Location: Yorkville, IL
Posts: 7,639
#7
Super Member
Join Date: Sep 2011
Location: West Texas
Posts: 2,073
I follow the instructions on the Retayne bottle, which includes using very hot water for 20 minutes before rinsing in cool water. With a small piece, I sometimes cheat and do it in the sink without much agitation. However, I do let it soak for at least 20 minutes.
Dayle
Dayle
#9
I've not used Retayne yet (have not found it yet) but have had good luck with Synthrapol.
(note: retayne "sets" the dye, Synthrapol will let the fabric bleed but the off cast dye is held in state where it won't adhere to other fabric).
I also wash a second time (without synthrapol) and add a color catcher, then I continue to wash until the color catcher is clean.
I've not found any real rhyme or reason to what colors bleed more, and what fabrics bleed more. I've had reds that bleed a lot, and reds that didn't bleed much (including a red batik). I've had solid black Kona that bled not one bit, and a solid black from Northcott that bled for 3 washes. I've had a stripe bleed for several washes. I've had some batiks not bleed at all. So I handle ALL fabric the same - as if it will bleed, and I keep washing until I have a clean color catcher. I had one bad experience with a multi-colored print from Cothworks that I washed once, added to a quilt, then it bled all over the yellow border. I won't be fooled again.
(note: retayne "sets" the dye, Synthrapol will let the fabric bleed but the off cast dye is held in state where it won't adhere to other fabric).
I also wash a second time (without synthrapol) and add a color catcher, then I continue to wash until the color catcher is clean.
I've not found any real rhyme or reason to what colors bleed more, and what fabrics bleed more. I've had reds that bleed a lot, and reds that didn't bleed much (including a red batik). I've had solid black Kona that bled not one bit, and a solid black from Northcott that bled for 3 washes. I've had a stripe bleed for several washes. I've had some batiks not bleed at all. So I handle ALL fabric the same - as if it will bleed, and I keep washing until I have a clean color catcher. I had one bad experience with a multi-colored print from Cothworks that I washed once, added to a quilt, then it bled all over the yellow border. I won't be fooled again.
#10
Super Member
Join Date: May 2012
Location: Florida
Posts: 1,585
I use Rit Dye Fixative. It is not carried by JoAnns, Wal-Mart, K-Mart, Hobby Lobby or any other store -- and I've been to all of them in Marion County, Florida. I went online and ordered it directly from the company. The first time I ordered it, it cost me more to ship it than the product actually cost, but that's okay! After putting that much work into a quilt I sure don't want to lose it due to bleeding dyes!
Jeanette Frantz
Jeanette Frantz
Thread
Thread Starter
Forum
Replies
Last Post