How do you use a template with a rotary cutter?
#1
Super Member
Thread Starter
Join Date: Jun 2008
Location: British Columbia
Posts: 2,353
How do you use a template with a rotary cutter?
I've read through the archives looking for ideas about using templates with my rotary cutter, but am still left with questions.
What I want to know is how others handle templates when cutting pieces. When cutting shapes for applique, I pin my pattern to the fabric and use scissors to cut around it. But, when cutting odd shapes with straight edges, I'd like to use my rotary cutter. Then I begin to run into problems with the pattern moving as I reposition my ruler. Do you use tape to hold templates in place? I can't imagine gluing to the fabric, but must confess to being tempted. Tracing doesn't seem to solve the problem but instead adds the inaccuracy of line thickness and ink or other substance on my fabric.
I think I'm stuck somewhere in my past life of sewing clothing and all that cutting out of patterns! Mostly the templates I use are paper with the pattern printed on it that I then cut around. Pinning doesn't work because the pin then interferes with the ruler.
What I want to know is how others handle templates when cutting pieces. When cutting shapes for applique, I pin my pattern to the fabric and use scissors to cut around it. But, when cutting odd shapes with straight edges, I'd like to use my rotary cutter. Then I begin to run into problems with the pattern moving as I reposition my ruler. Do you use tape to hold templates in place? I can't imagine gluing to the fabric, but must confess to being tempted. Tracing doesn't seem to solve the problem but instead adds the inaccuracy of line thickness and ink or other substance on my fabric.
I think I'm stuck somewhere in my past life of sewing clothing and all that cutting out of patterns! Mostly the templates I use are paper with the pattern printed on it that I then cut around. Pinning doesn't work because the pin then interferes with the ruler.
#2
I just watched a fons and porter show that adressed this. They put a small cutting mat on a large one...cut 2 sides and then turned it to cut 2 more. The other thing they did was use a glue stick to hold a template in place - the thin kind you can make yourself. I also have heard of gluing fine grade sandpaper to the template - that helps hold it in place and not slip - have not tried any of this, but it sounds good.
#3
Power Poster
Join Date: Apr 2011
Location: Ontario, Canada
Posts: 17,827
Sandpaper ... you can buy dots of it in the hardware store. Saves cutting and glue already there.
Perhaps some 2-sided tape on your template?
I don't use paper templates, though when I have had templates in acrylic, a small rotary cutter zips around the edges pretty quick.
If they are templates you'll use a lot, for a very low cost, a glass cutting shop could cut them easy enough for you. Mine puts a hole in them, so I can easily string all together that are a set.
I've also heard of folks using old tupperware lids, or yogurt lids, etc. to cut out templates, so they have something more substantial than a piece of paper .... that I'd soon cut it up with the rotary cutter!
Perhaps some 2-sided tape on your template?
I don't use paper templates, though when I have had templates in acrylic, a small rotary cutter zips around the edges pretty quick.
If they are templates you'll use a lot, for a very low cost, a glass cutting shop could cut them easy enough for you. Mine puts a hole in them, so I can easily string all together that are a set.
I've also heard of folks using old tupperware lids, or yogurt lids, etc. to cut out templates, so they have something more substantial than a piece of paper .... that I'd soon cut it up with the rotary cutter!
#4
You have for more patience than I!!! I have several templates and tried to do a Dresden Plate but gave up after the inaccurate cuts. I love quilting so far, but I dread "cutting" so I decided to splurge on the AccuQuilt go. I hope this works better for me if not I guess I will give up quilting!!
Merry Christmas!!
Merry Christmas!!
#5
Super Member
Join Date: Nov 2010
Location: SoCal
Posts: 1,813
I take tape and wrap it so that the sticky side is out and tape the ends together (hope that makes sense). Then I put them between the template and the fabric. When it stops sticking, I just make more til I'm done.
#7
Power Poster
Join Date: Mar 2011
Location: Ontario, Canada
Posts: 41,538
Trace your template onto the paper side of freezer paper. The shiny side of freezer paper can be temporarily fused to the fabric with your iron. The rotary ruler should be able to be either placed right at the edge of the shape for rotary cutting or on the 1/4 inch mark on the ruler and cut to add the seam allowance. The template can then be peeled off and used a few more times before it loses it's stickiness. I think this would be your best bet on a template that wouldn't shift as you cut. Good Luck!
#8
Senior Member
Join Date: Apr 2010
Location: Lived in San Diego now retired in Eagar, AZ.
Posts: 887
if i have a template, i tape it to the ruler and then place and cut... this includes one strip and multiple strips...for instance, when cutting the windmill...i sewed the 'blade' fabric in a strip to the 'sky' fabric and then marked the template with the line where they were sewn together.... tape face up (so you can see thru the ruler) to the ruler and then line up line with seam...cut and done....the 8 seam block just became a 4 seam block... love it!!!!
#9
That is what I do .You can see through the tape but can't the sandpaper.
#10
Trace your template onto the paper side of freezer paper. The shiny side of freezer paper can be temporarily fused to the fabric with your iron. The rotary ruler should be able to be either placed right at the edge of the shape for rotary cutting or on the 1/4 inch mark on the ruler and cut to add the seam allowance. The template can then be peeled off and used a few more times before it loses it's stickiness. I think this would be your best bet on a template that wouldn't shift as you cut. Good Luck!
Thread
Thread Starter
Forum
Replies
Last Post
Dolly's sister
Main
18
09-06-2011 08:37 AM
craftybear
Links and Resources
1
08-22-2011 08:00 PM