How to make your own design wall.
#1
Super Member
Thread Starter
Join Date: Aug 2010
Location: Delmarva Peninsula
Posts: 1,151
I am finally going to make my own design wall. Space is at a premium, so mine will have to be able to fold and put out of sight. I have heard that I can use foam insulation board and cover it with a flannel sheet, but the dh and i are at an impasse. I say the 1/4" board is okay, but he says 1/2" to 1" is best. What did you use to attach the flannel to the board? What have you done to make a design wall, and what are the sizes that you have, or wish to have. thanks!!!
#3
Banned
Join Date: Nov 2010
Posts: 4,134
I just checked mine - it's 3/4" thick. But I've got three of them that can stay up all the time. Around $11 at HD for a 4'x8' sheet.
I definitely would pass on the 1/4". You want to make sure it can stand by itself (just leaning against the wall) without sagging, if you're not planning to attach it. Also, you don't want pins to scratch up your wall behind it (if it's temporary).
I covered mine with Warm&Natural batting . For some reason 2 are white and one natural. :roll: More great planning on my part, no doubt.
I used the spray stuff for presentation boards. But I've read where people just pin the batting/flannel to the boards.
After I sprayed and attached the batting, I trimmed it to just over the edges.
Then I covered the edges all around with duck tape.
Why?
I don't really remember my reasoning at the time, but it did make sense. ;-)
I definitely would pass on the 1/4". You want to make sure it can stand by itself (just leaning against the wall) without sagging, if you're not planning to attach it. Also, you don't want pins to scratch up your wall behind it (if it's temporary).
I covered mine with Warm&Natural batting . For some reason 2 are white and one natural. :roll: More great planning on my part, no doubt.
I used the spray stuff for presentation boards. But I've read where people just pin the batting/flannel to the boards.
After I sprayed and attached the batting, I trimmed it to just over the edges.
Then I covered the edges all around with duck tape.
Why?
I don't really remember my reasoning at the time, but it did make sense. ;-)
#4
Power Poster
Join Date: Apr 2011
Location: Ontario, Canada
Posts: 17,858
The thinner the styrofoam, the more likely it will snap as you move it about. Plus you do put weight/stress onto it as you press your pieces to the wall.
Do you have a set of sliding closet doors? Perhaps put your flannelette onto them?
Also, there's a flannelette fabric that comes with a grid on it, that works perfect for design walls.
My design wall is fovered with black polar fleece .... fabric pieces, actually whole quilts stick to it nicely. I chose it so I could get the 60" width. Oh how I love love love my black fuzzy wall!!! :)
Do you have a set of sliding closet doors? Perhaps put your flannelette onto them?
Also, there's a flannelette fabric that comes with a grid on it, that works perfect for design walls.
My design wall is fovered with black polar fleece .... fabric pieces, actually whole quilts stick to it nicely. I chose it so I could get the 60" width. Oh how I love love love my black fuzzy wall!!! :)
#6
Banned
Join Date: Dec 2010
Location: Colorado
Posts: 1,376
This might sound a little wierd, but this is what I did. I got one of those cardboard cutting mats from Joanns with my 40% coupon (of course) and I stapled flannel to the side that is on the inside when it is folded. (I wrapped the flannel around to the back to staple it) I can fold it up and stash it when I'm not using it. It's big enought and portable enough for me.
#7
Super Member
Thread Starter
Join Date: Aug 2010
Location: Delmarva Peninsula
Posts: 1,151
So many great ideas thanks! I realize that I will need the 1 -1 1/4" board, thanks to all the info (hate it when dh is right) , I like the polar fleece idea to use to front the board, because it comes in 60" width, a 4 x 8 sheet will be big for my tiny space, and I can leave it up, leaning against a tall dresser, and move it when I need to get into the dresser and with that thickness not worry about it bending (never thought about that). I wonder which will hold the quilt squares better, the polar fleece, or warm & natural batting. Any ideas on this?
Originally Posted by nhweaver
I am finally going to make my own design wall. Space is at a premium, so mine will have to be able to fold and put out of sight. I have heard that I can use foam insulation board and cover it with a flannel sheet, but the dh and i are at an impasse. I say the 1/4" board is okay, but he says 1/2" to 1" is best. What did you use to attach the flannel to the board? What have you done to make a design wall, and what are the sizes that you have, or wish to have. thanks!!!
#9
Originally Posted by the casual quilter
This might sound a little wierd, but this is what I did. I got one of those cardboard cutting mats from Joanns with my 40% coupon (of course) and I stapled flannel to the side that is on the inside when it is folded. (I wrapped the flannel around to the back to staple it) I can fold it up and stash it when I'm not using it. It's big enought and portable enough for me.
#10
What about silence cloth instead of flannel, fleece, or batting?
The folks in my guild say it's very adhesive to cotton - the only thing they know of that can hold squares in a breezy window without any other adhesive.
The folks in my guild say it's very adhesive to cotton - the only thing they know of that can hold squares in a breezy window without any other adhesive.
Thread
Thread Starter
Forum
Replies
Last Post
tothenci
Links and Resources
1
12-27-2011 10:17 PM
craftybear
Links and Resources
6
08-22-2011 05:12 PM
craftybear
Links and Resources
5
05-18-2011 07:04 AM