"I was taught to . . . . "
#1
Power Poster
Thread Starter
Join Date: May 2008
Location: MN
Posts: 24,666
"I was taught to . . . . "
How much of what you first learned in quilting still works for you?
How far off that original track have you been willing to go?
Does what your first teacher/instructor said tend to be what you automatically do?
I did know how to do some sewing when I took my first quilting class - which was mainly learning how to piece by hand.
Overall, I think think the instructor did a good job. I still do a lot of the things the way she taught them. We ran out of time before we got to the quilting and binding part. I learned that from a book.
Some of the things I do remember: (This was probably early 1990's - don't remember exactly when)
How to tie a quilter's knot - very handy -
We used template plastic for our patterns - or we used hers.
Coats & Clark Dual Duty (cotton covered polyester) was what she recommended for sewing
How to hand piece - technique very similar to Jinny Beyer's -
I find it useful to hand-piece a tricky block - especially when I don't know how I might want to press it after it is finished.
I don't remember rotary cutters. i do remember tracing her templates to use for our blocks. Trace ON the line - not around the line!
How far off that original track have you been willing to go?
Does what your first teacher/instructor said tend to be what you automatically do?
I did know how to do some sewing when I took my first quilting class - which was mainly learning how to piece by hand.
Overall, I think think the instructor did a good job. I still do a lot of the things the way she taught them. We ran out of time before we got to the quilting and binding part. I learned that from a book.
Some of the things I do remember: (This was probably early 1990's - don't remember exactly when)
How to tie a quilter's knot - very handy -
We used template plastic for our patterns - or we used hers.
Coats & Clark Dual Duty (cotton covered polyester) was what she recommended for sewing
How to hand piece - technique very similar to Jinny Beyer's -
I find it useful to hand-piece a tricky block - especially when I don't know how I might want to press it after it is finished.
I don't remember rotary cutters. i do remember tracing her templates to use for our blocks. Trace ON the line - not around the line!
#2
Power Poster
Join Date: Jun 2011
Location: Southern California
Posts: 19,127
I started to seriously quilt when rotary cutters hit the stores. I still stick with what the basics that I was taught. It is just more comfortable for me than trying new techniques like glue basting a quilt. Pins still work well for me. If I see a better way of making a quilt, I won't follow the directions. I look for patterns with good bones. I am not sure that many of our new quilters get into a LQS since there is so much that is easier learn than watching a video.
#3
I began quilting as a teen in the early 1970s.
There were no "quilting shops," no Internet, only a small selection of old books, and just a few magazines. Where I lived they were few and far between. (Yes, it was hard walking five miles to school, uphill, barefoot, and in the snow! LOL)
I taught myself to piece and quilt by reading news and women's magazine articles, a couple old books, and "studying" my great-grandmother's quilts. I never saw a Quilt Shop until I was in my early 30s.
Several older women in the community helped me learn, also.
I learned to...
- Always wash and iron the fabric I was using, which was mostly old cotton clothes. If new fabric was used, it must also be washed and ironed before cutting.
- Sharpen several #2 pencils before beginning to trace around the cardboard (cereal box) templates. I'd wrap clear tape around the edge of the cardboard to help the templates hold their shape longer.
- Never use the "fabric scissors" to cut the cardboard templates.
- Never try to cut out all the pieces and start sewing blocks on the same day.
- Arrange the "patches" into groups according to how you will piece them together, and have your pins, threaded needles, thimble, and scissors, all in one place.
- Wash your hands before beginning the piece work.
- Always press your patches before sewing over seams that crossed.
- Measure carefully, and press, press, press.
There were no "quilting shops," no Internet, only a small selection of old books, and just a few magazines. Where I lived they were few and far between. (Yes, it was hard walking five miles to school, uphill, barefoot, and in the snow! LOL)
I taught myself to piece and quilt by reading news and women's magazine articles, a couple old books, and "studying" my great-grandmother's quilts. I never saw a Quilt Shop until I was in my early 30s.
Several older women in the community helped me learn, also.
I learned to...
- Always wash and iron the fabric I was using, which was mostly old cotton clothes. If new fabric was used, it must also be washed and ironed before cutting.
- Sharpen several #2 pencils before beginning to trace around the cardboard (cereal box) templates. I'd wrap clear tape around the edge of the cardboard to help the templates hold their shape longer.
- Never use the "fabric scissors" to cut the cardboard templates.
- Never try to cut out all the pieces and start sewing blocks on the same day.
- Arrange the "patches" into groups according to how you will piece them together, and have your pins, threaded needles, thimble, and scissors, all in one place.
- Wash your hands before beginning the piece work.
- Always press your patches before sewing over seams that crossed.
- Measure carefully, and press, press, press.
Last edited by Caroline94535; 05-15-2015 at 09:17 AM.
#4
I learned to pre-wash , tear to get straight grain. I always do that!! I also learned that you don't HAVE to have every special ruler or template. My first quilts I made templates from cardboard, sandpaper backing, traced around them with pencil on single layer fabric, and cut out by hand. I used graph paper and colored pencils to layout my own versions and to see how much fabric to buy for each thing. I learned you can do without, but so much easier with all the new ways!!
#5
My Mom an grandmothers taught me to sew and quilt from a very young age. I still use all they taught me. The only real change for me has been the rotary cutter, quilting rulers, and plastic templates. I shudder to think of going back to scissors, a yard stick and old newspaper. LOL
#8
Senior Member
Join Date: Dec 2012
Posts: 381
Learning to qult.
My Mom an grandmothers taught me to sew and quilt from a very young age. I still use all they taught me. The only real change for me has been the rotary cutter, quilting rulers, and plastic templates. I shudder to think of going back to scissors, a yard stick and old newspaper. LOL
Thread
Thread Starter
Forum
Replies
Last Post
bearisgray
General Chit-Chat (non-quilting talk)
65
02-01-2024 09:04 AM
Ethel A
Main
46
04-20-2009 07:16 AM