Invisable thread
#2
Senior Member
Join Date: Oct 2011
Location: Iowa
Posts: 816
I like using invisible thread. My machine has no problems with it.
I'd test it on a practice piece first. I have a hard time picturing satin stitch looking good with invisible thread. Satin stitch generally closes a raw edge, and you'd see through the thread, and I feel like it would have a plasticity looking build up. Maybe not though- that's why you should test.
I'd test it on a practice piece first. I have a hard time picturing satin stitch looking good with invisible thread. Satin stitch generally closes a raw edge, and you'd see through the thread, and I feel like it would have a plasticity looking build up. Maybe not though- that's why you should test.
#3
Super Member
Join Date: Apr 2010
Location: Illinois
Posts: 9,312
I use lots of it , but would not use it for satin stitch. That much thread used in a satin stitch ... it would not be so invisible. Think about using a blanket stitch and shorten the "bite", it would be much more "invisible.
#4
Power Poster
Join Date: Dec 2008
Location: Western Wisconsin
Posts: 12,930
The invisible thread I have used for machine applique is YLI's nylon monofilament .003. This thread would never be used for satin stitching, though. Usually satin stitching is done with cotton or polyester thread. Although I have a spool of polyester invisible thread, I cannot imagine using it for satin stitching either. The stitching would become very hard.
At the very least, try whatever invisible thread it is that you have on a sample piece first to make sure you will like it.
At the very least, try whatever invisible thread it is that you have on a sample piece first to make sure you will like it.
#7
Power Poster
Join Date: Dec 2008
Location: Western Wisconsin
Posts: 12,930
Are you doing fusible applique? People use a variety of edge finishes on fusible. Most do not use satin stitch (even with cotton or polyester threads) because satin stitch creates a really hard edge. Many use either a small zigzag or a blanket-type stitch. The edges are partially exposed but may not fray -- depending on type of fusible used. What fusible are you using?
#8
Super Member
Join Date: Oct 2010
Location: howell, Mi
Posts: 2,345
Whenever I use invisible thread, I only use it in the top thread. The bobbin is a good quality cotton thread, and I use a small zig zag stitch. The fusible keeps the edges from fraying. I think a satin stitch would be too stiff and tight and wouldn't look good. Make sure you make a sample to make sure this is the look you want.
Sue
Sue
#9
Power Poster
Join Date: Mar 2011
Location: Ontario, Canada
Posts: 41,548
Many people stitch a straight stitch about 1/8 inside of fused appliqué pieces for raw edge appliqué. This is used frequently in art quilts or wallhangings. I would not recommend a satin stitch with invisible thread. If you want to cover the raw edge with satin stitch, I would recommend you use something like Gutermann Sulky for a pretty satin stitch or similar.
Thread
Thread Starter
Forum
Replies
Last Post