Irons
#4
Super Member
Join Date: Mar 2013
Location: Texas
Posts: 1,198
My favorite iron is a Continental Dry Iron. I purchased mine from Amazon ($40), but I have read that it can be purchased at Home Depot for a little less. I use it for all my quilting, but purchased it originally for fusible. Since there are no steam holes, there are no unfused dots. It doesn't have an auto-off option, gets hot fast and stays hot. I don't use steam, just a spray bottle of water or 1/2 & 1/2 water and Best Pressed.
#5
I like my Reliable Digital Velocity V100. It produces great steam, although I usually use it dry. I had a Rowenta that failed within the warranty period, and dealing with their western region service center was probably the worst service experience I've ever had. When the same iron failed again just after it was out of warranty I decided never to buy Rowenta again, even though I loved that iron (when it was working).
#10
I've had the Oliso for a few months now - so not long enough for much of a review.
So far - what I have come to love
1. I don't worry about bumping into it (the hot plate) while it's sitting on it's end on the iron board
2. I don't worry about knocking the ironing board and having it tip over and fall on the floor (I've lost most of my irons that way, after a fall or two - something stopped working correctly).
3. I love that I can just slide it off the fabric and let go - though it does get hot enough under it so you don't want to set it over something that can't take the heat (like your cutting mat . . .)
4. I have the one that stays on for 30 minutes, which is nice.
5. I really like the stepped shoulder of the plate, I've found that notch works very well for pressing seams open.
I do not use steam, so I can say how well that feature works. You can also turn off the auto lift feature if you are doing something that you need the iron to sit on for a bit. And I have not had it long enough to comment on long term durability.
So far - what I have come to love
1. I don't worry about bumping into it (the hot plate) while it's sitting on it's end on the iron board
2. I don't worry about knocking the ironing board and having it tip over and fall on the floor (I've lost most of my irons that way, after a fall or two - something stopped working correctly).
3. I love that I can just slide it off the fabric and let go - though it does get hot enough under it so you don't want to set it over something that can't take the heat (like your cutting mat . . .)
4. I have the one that stays on for 30 minutes, which is nice.
5. I really like the stepped shoulder of the plate, I've found that notch works very well for pressing seams open.
I do not use steam, so I can say how well that feature works. You can also turn off the auto lift feature if you are doing something that you need the iron to sit on for a bit. And I have not had it long enough to comment on long term durability.
Thread
Thread Starter
Forum
Replies
Last Post