Long arm frame?
#1
I was wondering if you could buy a long arm quilting frame and put your sewing machine on it or does it have to be a certain kind of machine for just quilting?
I have a singer xL 1000 and a husq #1+ would any of these machine work on a quilting frame?
thanks , hope this isn't to dumb of a question..LOL
I have a singer xL 1000 and a husq #1+ would any of these machine work on a quilting frame?
thanks , hope this isn't to dumb of a question..LOL
#3
many frames use your DSM. the issue is that there is very little quilting space once you roll your quilt to the far end. i just finished a king with my Juki TL98Q. However, there was a lot of rolling and i had to be creative with the patterns use.
#4
I just put my Juki 2010 on a Mini Pinni Pinacle frame and quilted my first framed quilt this way. Went way faster than pushing the fabric through the Juki. The patterns are a concern but as long as they aren't too big you should be able to do anything. Meandering is probably the best bet to start.
#7
Member
Join Date: Nov 2010
Posts: 35
Does it work to use a computerize machine? I have a Janome Memory Craft 10001, combo machine. I read on another post that you should have some type of stitch regulator on the machine and that it doesn't work with computerized machines. Anyone have any more info on this?
Thanks.
Thanks.
#8
Super Member
Join Date: Aug 2007
Location: Clay Springs AZ
Posts: 3,229
Only strait stitch machines can be used with a frame and stitch regulator.
If you look up stitch regulators it will show which machines you can use with them.
These are cheaper machines like the Brother 1500s which I found for 599 on line. The Janome 6600 is one I think.
These machines are around 9 1/2 inch throats.
I dont know if you can use a computerized machine but do know you cant get a stitch regulator for one.
If you look up stitch regulators it will show which machines you can use with them.
These are cheaper machines like the Brother 1500s which I found for 599 on line. The Janome 6600 is one I think.
These machines are around 9 1/2 inch throats.
I dont know if you can use a computerized machine but do know you cant get a stitch regulator for one.
Thread
Thread Starter
Forum
Replies
Last Post
mjpEncinitas
Links and Resources
26
11-28-2019 06:48 AM
thseabreze
Main
14
06-27-2017 05:23 AM
babyfireo4
Main
21
08-31-2012 04:00 AM