N ew Janome 6600 problem-fabric won't move
#1
My Janome is only 1 month old and when I tried to sew tonight, the fabric wouldn't move. It isn't that I dropped the feed dogs by mistake. Before this problem I didn't even know where the feed dog lever was located. Anyhow, when I now try to move the lever, nothing happens. Shouldn't I see the feed dog drop? Any suggestions as to why my fabric won't move? TIA
#5
Member
Join Date: Jun 2010
Location: North Dakota
Posts: 22
I've had that happen with my Janome 9000 when I have switched from FMQ to regular sewing. Sometimes just touching the pad to the right of the machine wasn't enough. I had to use the switch on the machine to raise the feed dogs, and no I really couldn't tell that they had moved by looking, but I certainly could tell when I tried to move the fabric. Good luck.
#7
Originally Posted by EasyPeezy
Which foot are you using? If you are using the accufeed, make sure
the dual feed device is properly engaged. I've had this happen when
changing feet. It just keep stitching in the same spot.
the dual feed device is properly engaged. I've had this happen when
changing feet. It just keep stitching in the same spot.
Thread
Thread Starter
Forum
Replies
Last Post
I go To The Sea To Breathe
General Chit-Chat (non-quilting talk)
17
07-03-2011 05:01 PM